메인보드 GA-EP45-UD3R
CPU : Q9550 2.85GHz -> 3.6GHz (Over Clocking)
RAM : DDR2 2GB (1GB x 2)
그래픽 카드 : nVidia 9800GT - 512MB
HDD 구성 : 1 IDE + 2 SATA + 1 FireWire + 1 USB HDD
II. CMOS setup 방법.
Standard CMOS Features:
1. Change the Date and Time to the correct values
2. Set “Drive A” to “None”
3. Set “Floppy 3 Mode Support” to “Disabled’
4. Set “Halt On” to “All, But Keyboard”
Advanced BIOS Features:
1. Set “First Boot Device” to “Hard Disk”
2. Set “Second Boot Device” to “CDROM”
3. Set “Third Boot Device” to “Disabled”
4. Set “HDD S.M.A.R.T. Capability” to “Enabled”
5. Set “Limit CPUID Max. to 3” to “Disabled”
6 Set “No-Execute Memory Protect” to “Enabled”
7. Set “CPU Enhanced Halt (C1E)” to “Enabled”
8. Set “CPU Thermal Monitor 2 (TM2)” to “Enabled”
9. Set “CPU EIST Function” to “Enabled”
10. Set “Virtualization Technology” to “Enabled”
11. Set “Full Screen LOGO Show” to “Disabled”
12. Set “Init Display First” to “PEG”
Integrated Peripherals:
1. Set “SATA AHCI Mode” to “AHCI”
2. Set “SATA Port0-1 Native Mode” to “Enabled”
3. Set “USB Controller” to “Enabled”
4. Set “USB 2.0 Controller” to “Enabled”
5. Set “USB Keyboard Support” to “Enabled”
6. Set “USB Mouse Support” to “Enabled”
7. Set “Legacy USB storage detect” to “Enabled”
8. Set “Azalea Codec” to “Auto”
9. Set “Onboard H/W LAN” to “Enabled”
10. Set “Onboard IDE Controller” to “AHCI”
11. Set “Onboard Serial Port 1” to “Disabled"
12. Set “Onboard Parallel Port” to "Disabled”
Power Management Setup:
1. Set “ACPI Suspend Type” to “S3(STR)”
2. Set “Soft-Off by PWR-BTTN” to “Instant-Off”
3. Set “PME Event Wake Up” to “Disabled”
4. Set “Power On by Ring” to “Disabled”
5. Set “Resume by Alarm” to “Disabled”
6. Set “HPET Support” to “Enabled”
7. Set “HPET Mode” to “64-bit mode”
8. Set “Power On By Mouse” to “Disabled”
9. Set “Power On By Keyboard” to “Disabled”
10. Set “AC Back Function” to “Soft-Off”
