달력

3
2009. 10. 21. 11:00

Asus P5P43TD Pro Hackintosh/Mainboard2009. 10. 21. 11:00

CPU : Core 2 Duo 2.93
Mobo : Asus P5P43TD Pro
Ram : DDR3 2GB
HD : Primary SATA = 500 GB
DVD : 6th SATA = HP DVD writer 200i
VGA : Gigabyte Nvidia 9500GT 1GB
Realtek ACL887HD

Athores L1E

iAtkos v7 으로 부팅옵션"mach_970 -v cpus=1 -legacy"을 주어 설치성공하였지만, 몇가지 에러가 뜨고 결국 성공하였습니다.

iDeneb 10.5.7 버전도 부팅옵션만 주면 설치성공할 경우인 것 같습니다만, 실행해 보지는 않았습니다.

-사용자화 선택 항목은 거의 잃어버렸습니다.

The Mickey mouse Guide for iAtkos v7 이 많은 도움이 되었습니다.

처음으로 재부팅하여 환영동영상 보는데 대략 5-7분이 걸리더군요.

처음 세팅이 끝난 후 마우스가 약간의 랙과 느린 느낌이 났습니다. 그리고 가끔 행에 걸리기도 합니다. ^ ^

다시 재부팅을 시도 하였는데 대략 10-30분이 걸립니다. 된장!

오디오 카드는 제대로 동작이 됩니다. LAN은 다시 설정해줘야 할 것 같군요.


'Hackintosh > Mainboard' 카테고리의 다른 글

MSI P43 Neo3-F  (0) 2009.10.22
GA-EP45-UD3L  (0) 2009.10.21
ASUS P5KC 에 IATKOS 설치 DVD로 OSX 설치하기  (0) 2009.10.17
GA-EX58-UD3R  (0) 2009.07.08
dsdt magic  (0) 2009.07.06
:
Posted by Ritz®™

IDE DVD-ROM 이 IATKOS 설치이미지가 지원하지 못하는 JMB363 controller에 후킹하기 때문에 에러 메시지가 발생한다.

SATA DVD-ROM 혹은 SATA 를 IDE/ATAPI converter를 이용하여 연결한다.

Promise Ultra133 TX2 같은 IDE 애드론 카드를 이용하면 이와 비슷한 역활을 하기 때문에 이용하는 방법도 좋다.

iATKOS 설치 DVDJMB363에 연결된 하드드라이버나 혹은 ICH9 Controller 1의 두개의 하드 연결중 하나에 이를테면 SATA 1 이나 2에 설치한다.
안타깝게도 Atheros NIC 는 동작하지 않으므로 저렴한 RTL8139 랜카드를 하나 구한다.

설치한 후에 ICH9 Controller 2 와 사운드카드 ALC883을 동작시키기 위해 다음과 같은 작업을 한다.


ICH9 SATA (Vendor: 8086, Device ID: 2921 [Controller 1] & 2926 [Controller 2])

————————————

1. terminal을 실행하고 다음과 같은 순서로 커맨드를 입력한다.


# sudo su

# nano /System/Library/Extensions/IOATAFamily.kext/Contents/PlugIns/AppleIntelPIIXATA.kext/Contents/Info.plist

Remove ” 0x29268086” from the line:

<string>0x29218086 0x29268086</string>

to make it look like this:

<string>0x29218086</string>

Save and exit nano (Ctrl+o Ctrl+x).


# nano /System/Library/Extensions/AppleVIAATA.kext/Contents/Info.plist

Add “0x29268086 ” to the line:

<string>0x2363197B 0x31491106 0x00e310de 0x005410de 0x005510de</string>

to make it look like this:

<string>0x29268086 0x2363197B 0x31491106 0x00e310de 0x005410de 0x005510de</string>

Save and exit nano (Ctrl+o Ctrl+x).


# rm /System/Library/Extensions.mkext
# rm /System/Library/Extensions/Caches/com.apple.kext.info

# kextcache -k /System/Library/Extensions/


2. 재부팅한다.
3. BIOS에서 Intel ATA 를 Enhanced/IDE 로 JMicron 을 IDE 로 세팅해준다.




Realtek HD Audio ALC883 (Vendor: 10ec, Device ID: 0883)

————————————

1. 다음툴들을 다운로드한다.

- AppleHDAPatcherv1.20.zip here: http://forum.insanelymac.com/index.php?showtopic=32859

- 883_Asus_P5KC_codec_dump.txt here: http://forum.insanelymac.com/index.php?s=&…st&p=547910

2. 드래그 앤 드랍으로 883_Asus_P5KC_codec_dump.txt 을 AppleHDAPatcherv1.20 에 넣어 다음 진행하는 순서대로 진행한다.

3. 재부팅한다.

'Hackintosh > Mainboard' 카테고리의 다른 글

GA-EP45-UD3L  (0) 2009.10.21
Asus P5P43TD Pro  (0) 2009.10.21
GA-EX58-UD3R  (0) 2009.07.08
dsdt magic  (0) 2009.07.06
Iwill P4HT2 구형 메인보드에 OSX 를 설치하다.  (0) 2009.06.07
:
Posted by Ritz®™
2009. 7. 8. 12:20

GA-EX58-UD3R Hackintosh/Mainboard2009. 7. 8. 12:20

항상 설치하는 거지만 할때마다 좀더 깔끔하게 설치할려고 엉뚱한 아이디어(?)를 고민하다보니 본의아니게 시간은 시간대로 왕창 깨지는 군요.
에효 걍 하던대로 하는 것이 제일인 것을....

'Hackintosh > Mainboard' 카테고리의 다른 글

Asus P5P43TD Pro  (0) 2009.10.21
ASUS P5KC 에 IATKOS 설치 DVD로 OSX 설치하기  (0) 2009.10.17
dsdt magic  (0) 2009.07.06
Iwill P4HT2 구형 메인보드에 OSX 를 설치하다.  (0) 2009.06.07
Mac Os X on P5E + 8800GT and Q6600  (0) 2009.05.25
:
Posted by Ritz®™
2009. 7. 6. 17:39

dsdt magic Hackintosh/Mainboard2009. 7. 6. 17:39

:
Posted by Ritz®™

--------------------------------------------------
CPU : P4 (2.4GHZ)
메모리 : 1G
메인보드 : Iwill P4HT2(845PE 칩셋) <<<<<< 다행히 Intel 칩셋입니다. Via나 ATI칩셋이면 사용자화에서 이 칩셋을 선택해야 겟지요.
그래픽 : Geforce 4200TI (64 MB), <<<< QE/CI가 잡히질 않는 군요.
사운드 : 온보드
랜 : Intel 10/100 Pro dual
하드디스크 : 60G HDD (PATA IDE)
입력장치 : USB Keyboard/Mouse
OSX 버전 : 10.4.6
--------------------------------------------------

xXx 10.5.6 파이널 버전으로 설치하여 보았습니다.
사용자화에서

- 커널은 Voodoo(Anv) 커널로 선택
- ich FIX 선택
- SMC MacPro3 선택

이 세가지만 선택하여 설치하였습니다.
안정성은 걍 무난하군요. 아직까지는....
i일과 i생활은 다른 시스템에 설치되어 있는 것을 마이그레이션으로 가져와야 할 듯,,,,

사연이 있습니다.
누군가에게 줄려고 BlackJack으로 부터 메인보드와 그래픽 카드를 받았는데 USB가 맛이 갔었습니다.
USB를 수리할려고 친구넘에게 맡겼었는데 얼마전에야 수리했다고 가져와서 한번 설치해보았습니다.
완전복구까지 될 수 있게끔 PATA(IDE) 하드디스크를 3개 사용하였습니다.
이제 AGP용 그래픽 카드만 구해서 QE/CI 지원되게끔 구성하여 주면 될 것 같습니다.
아들넘이 사고만 치지 않았어도 벌써 설치해서 보낼 수 있었을텐데,,
BlackJack! 고마워.

'Hackintosh > Mainboard' 카테고리의 다른 글

GA-EX58-UD3R  (0) 2009.07.08
dsdt magic  (0) 2009.07.06
Mac Os X on P5E + 8800GT and Q6600  (0) 2009.05.25
Mac Os X on P5E + 8800GT and Q6600  (0) 2009.05.25
Enabling ACPI, EIST, etc for ASUS P5W DH DELUXE  (0) 2009.05.20
:
Posted by Ritz®™
2009. 5. 25. 09:33

Mac Os X on P5E + 8800GT and Q6600 Hackintosh/Mainboard2009. 5. 25. 09:33

First of all, thanks drmando for this Guide.

Mac Os X on P5E + 8800GT and Q6600

ALL YOU NEED IS IN THIS FILE: http://rapidshare.com/files/86007773/drmando.rar
The Bios-Setting
1. AHCI Enabled
If windows vista is already installed you will first have to boot into vista and go to your windows directory and open de regedit.exe. Then go to HKEY_LOCAL_MACHINE\Sysyem\CurrentControlSet\Services\Msahci and change the Start property to "0"
2. Execute disable function = enabled
3. ACPI2 support = Yes
4. Intel speed step = disabled
Now you are ready to install.

The Installation
I used the KALYWAY image to base my installation on
My system:
SATA HD Spinpoint Samsung 500GB
-)2partitions a OSX of 200
Data of the rest
SATA DVD-RW Lite-on 20x
ASUS P5E with an X38Chipset … see asus.com for entire hardware list.
2GB RAM GEIL
NVIDIA 8800GT OC MSI

After having done the bios settings I put in the cd of MAC OS X. I pressed F8 for installation options and put in a "–v" to have terminal view instead of white apple screen in witch you cannot see errors. Loading the GUI of the installation may take a while.

The GUI has loaded, and asks for your languague, choose one and continue. Now go to utilities -) Disk utility and format partition your HD to your will. Be sure to have a Journaled partition as OSX requires one to install onto the rest of the partitions you may choose like HFS or whatever other format you like.

Install the vanilla kernel with patch leave other options for what they are may only cause crash.

Complete the setup and reboot and remove the CD.

WARNING if after reboot you have error 0b NO WORRIES, its just that your partition is not active (YET) in that case just leave the DVD in it and let it time out and you will boot into leopard.

OSX now loads continue till registration then hit windows sign and Q to skip it.

OSX after installation
This is were the tricky part starts. First you have to fill in some info until you come at the registration form. Just press CTRL+Q (some keyboards WIN+Q or ALT+Q) to skip the registration. Mac Os X setup is now complete but graphics are standard, no sound an no networking device!

Solutions follow!
The network adaptor (IF IT'S NOT WORKING YET)
I started with the network adaptor. For my motherboard I need to find the kext or make the kext for a Marvell Yukon 8056 type. There is none … no problem I fix it!

You will need to download following file from rapidshare or from my zip file. gigabyte_ds3-4pack.1.2.dmg wich has the 8053 version of my chip included. I will use that one to make mine. Install the package and then reboot.

Go to the terminal and type following commands:
CODE
cd /System/Library/Extensions <-- changes directory
sudo nano IONetworkingFamily.kext/Contents/PlugIns/AppleYukon.kext/Contents/Info.plist <-- edits file

(find and change: <key>Yukon-88E8053</key>)
(to: <key>Yukon-88E8056</key>) <-- change "53" to "56"

(find and change: <string>Yukon Gigabit Adapter 88E8053</string>)
(to: <string>Yukon Gigabit Adapter 88E8056</string>) <-- change "53" to "56"

(find and change: <string>0x436211AB</string>)
(to: <string>0x436411AB</string>) <-- change "62" to "64"

(press Control-O) <-- saves changes
(press Y and Enter) <-- accepts saving to existing file
(press Control-X) <-- exits nano

sudo chown -R root:wheel IONetworkingFamily.kext <-- repairs permissions
cd /System/Library <-- changes directories
sudo rm -rf Extensions.mkext Extensions.kextcache <-- rebuilds kextcache on reboot
I have had a lot of problems finding the right commandline for the file. If the file is empty its not the right one!!! Google a bit and look around for different variations. These lines worked for me. IONetworkingFamily.kext/Contents/PlugIns/AppleYukon.kext/Contents/Info.plist

Once Opened you will have to change the file like stated above using the CTRL+… key for controlling the edit program with controls stated downside in the box.

Reboot and network will work.

The VGA
I have a 8800 GT OC 512 version of MSI. I looked around on the net and found out this was the easiest of all biggrin.gif

Just install the 10.5.2_NVkexts+.pkg included in my zip

The Audio
!UPDATE! ONLY THE BLUE EXIT LINE 2.1 SOUND !!!!

Take the AzaliaAudio.pkg from my zip and install it. Then run following command lines.

Step 1: (backup if you want too) Delete AppleHDA.kext:

sudo rm -rf /System/Library/Extensions/AppleHDA.kext

Step 2: Edit AppleAzaliaAudio.kext for matching codec's proper ID:

sudo nano /System/Library/Extensions/AppleAzaliaAudio.kext/Contents/Info.plist

goto Realtek ALC880/ALC860 Codec Driver key & change the <string> to

<string>0x11d4198b</string>

ctrl + O to save ctrl + X to quit

Step 3: Edit AppleAzaliaController.kext for matching ICH9R HDA interface proper ID:

sudo nano /System/Library/Extensions/AppleAzaliaAudio.kext/Contents/PlugIns/AppleAzaliaController.kext/Contents/Info.plist

find <key>IOPCIPrimaryMatch</key>

change the <string> to

<string>0x293e8086</string>

Step 4: Refresh kext caches

sudo rm /System/Library/Extensions.kextcache

kextcache -k /System/Library/Extensions/

Step 5: Disk Utility>Repair Disk Permissions

Step 6: Reboot

WARNING: in step 4 it might not succeed I just went to that directory and cleared the cache map myself restored my disk and rebooted and it worked fine.

YOU HAVE SUCCEDED!!
Congratulations!! You have successfully done what I have.

Hope this info was handy based mine on lots of posts trough the net, many thanks to those people.
!UPDATE!
I can see from my RS account that my file gets downloaded many times, plz leave some feedback so i can work on fixes. thank you!!
!UPDATE!
:
Posted by Ritz®™
2009. 5. 25. 09:33

Mac Os X on P5E + 8800GT and Q6600 Hackintosh/Mainboard2009. 5. 25. 09:33

First of all, thanks drmando for this Guide.

Mac Os X on P5E + 8800GT and Q6600

ALL YOU NEED IS IN THIS FILE: http://rapidshare.com/files/86007773/drmando.rar
The Bios-Setting
1. AHCI Enabled
If windows vista is already installed you will first have to boot into vista and go to your windows directory and open de regedit.exe. Then go to HKEY_LOCAL_MACHINE\Sysyem\CurrentControlSet\Services\Msahci and change the Start property to "0"
2. Execute disable function = enabled
3. ACPI2 support = Yes
4. Intel speed step = disabled
Now you are ready to install.

The Installation
I used the KALYWAY image to base my installation on
My system:
SATA HD Spinpoint Samsung 500GB
-)2partitions a OSX of 200
Data of the rest
SATA DVD-RW Lite-on 20x
ASUS P5E with an X38Chipset … see asus.com for entire hardware list.
2GB RAM GEIL
NVIDIA 8800GT OC MSI

After having done the bios settings I put in the cd of MAC OS X. I pressed F8 for installation options and put in a "–v" to have terminal view instead of white apple screen in witch you cannot see errors. Loading the GUI of the installation may take a while.

The GUI has loaded, and asks for your languague, choose one and continue. Now go to utilities -) Disk utility and format partition your HD to your will. Be sure to have a Journaled partition as OSX requires one to install onto the rest of the partitions you may choose like HFS or whatever other format you like.

Install the vanilla kernel with patch leave other options for what they are may only cause crash.

Complete the setup and reboot and remove the CD.

WARNING if after reboot you have error 0b NO WORRIES, its just that your partition is not active (YET) in that case just leave the DVD in it and let it time out and you will boot into leopard.

OSX now loads continue till registration then hit windows sign and Q to skip it.

OSX after installation
This is were the tricky part starts. First you have to fill in some info until you come at the registration form. Just press CTRL+Q (some keyboards WIN+Q or ALT+Q) to skip the registration. Mac Os X setup is now complete but graphics are standard, no sound an no networking device!

Solutions follow!
The network adaptor (IF IT'S NOT WORKING YET)
I started with the network adaptor. For my motherboard I need to find the kext or make the kext for a Marvell Yukon 8056 type. There is none … no problem I fix it!

You will need to download following file from rapidshare or from my zip file. gigabyte_ds3-4pack.1.2.dmg wich has the 8053 version of my chip included. I will use that one to make mine. Install the package and then reboot.

Go to the terminal and type following commands:
CODE
cd /System/Library/Extensions <-- changes directory
sudo nano IONetworkingFamily.kext/Contents/PlugIns/AppleYukon.kext/Contents/Info.plist <-- edits file

(find and change: <key>Yukon-88E8053</key>)
(to: <key>Yukon-88E8056</key>) <-- change "53" to "56"

(find and change: <string>Yukon Gigabit Adapter 88E8053</string>)
(to: <string>Yukon Gigabit Adapter 88E8056</string>) <-- change "53" to "56"

(find and change: <string>0x436211AB</string>)
(to: <string>0x436411AB</string>) <-- change "62" to "64"

(press Control-O) <-- saves changes
(press Y and Enter) <-- accepts saving to existing file
(press Control-X) <-- exits nano

sudo chown -R root:wheel IONetworkingFamily.kext <-- repairs permissions
cd /System/Library <-- changes directories
sudo rm -rf Extensions.mkext Extensions.kextcache <-- rebuilds kextcache on reboot
I have had a lot of problems finding the right commandline for the file. If the file is empty its not the right one!!! Google a bit and look around for different variations. These lines worked for me. IONetworkingFamily.kext/Contents/PlugIns/AppleYukon.kext/Contents/Info.plist

Once Opened you will have to change the file like stated above using the CTRL+… key for controlling the edit program with controls stated downside in the box.

Reboot and network will work.

The VGA
I have a 8800 GT OC 512 version of MSI. I looked around on the net and found out this was the easiest of all biggrin.gif

Just install the 10.5.2_NVkexts+.pkg included in my zip

The Audio
!UPDATE! ONLY THE BLUE EXIT LINE 2.1 SOUND !!!!

Take the AzaliaAudio.pkg from my zip and install it. Then run following command lines.

Step 1: (backup if you want too) Delete AppleHDA.kext:

sudo rm -rf /System/Library/Extensions/AppleHDA.kext

Step 2: Edit AppleAzaliaAudio.kext for matching codec's proper ID:

sudo nano /System/Library/Extensions/AppleAzaliaAudio.kext/Contents/Info.plist

goto Realtek ALC880/ALC860 Codec Driver key & change the <string> to

<string>0x11d4198b</string>

ctrl + O to save ctrl + X to quit

Step 3: Edit AppleAzaliaController.kext for matching ICH9R HDA interface proper ID:

sudo nano /System/Library/Extensions/AppleAzaliaAudio.kext/Contents/PlugIns/AppleAzaliaController.kext/Contents/Info.plist

find <key>IOPCIPrimaryMatch</key>

change the <string> to

<string>0x293e8086</string>

Step 4: Refresh kext caches

sudo rm /System/Library/Extensions.kextcache

kextcache -k /System/Library/Extensions/

Step 5: Disk Utility>Repair Disk Permissions

Step 6: Reboot

WARNING: in step 4 it might not succeed I just went to that directory and cleared the cache map myself restored my disk and rebooted and it worked fine.

YOU HAVE SUCCEDED!!
Congratulations!! You have successfully done what I have.

Hope this info was handy based mine on lots of posts trough the net, many thanks to those people.
!UPDATE!
I can see from my RS account that my file gets downloaded many times, plz leave some feedback so i can work on fixes. thank you!!
!UPDATE!
:
Posted by Ritz®™

I am also experiencing this with latest Ubuntu 9.04 amd64. My motherboard is P5W DH Deluxe, and I've tried various bios (enabling ACPI, EIST, CIE, etc...) and also factory defaults but the gnome applet frequency monitor will keep warning that the "frequency scaling is not supported for this processor". I have a modern Intel Quad Core Q6700, which should support this feature.

Kernel in use is : 2.6.28-11-generic

The various modules discussed here are all missing from my configuration, even with cpufreq and powernowd installed.

Some outputs :
find: "/sys/devices/system/cpu/cpu*/cpufreq": Aucun fichier ou dossier de ce type
cat: /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor: Aucun fichier ou dossier de ce type
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_drivercat: /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver:
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors
cat: /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors: Aucun fichier ou dossier de ce type
cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies
cat: /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies: Aucun fichier ou dossier de ce type

Tt says (in french) that I have none of these files or folders on my machine.


Solution

reverting to an older bios, v. 2504, ASUS bios team : stop making cheezy bios, please.


:
Posted by Ritz®™