달력

3

'CMOS SETUP'에 해당되는 글 1

  1. 2012.10.25 CMOS setup 방법
2012. 10. 25. 00:03

CMOS setup 방법 Hackintosh/Install2012. 10. 25. 00:03

  • I. CMOS setup 방법.
  • Standard CMOS Features.:
  • Change the Date and Time to the correct values 
  • Set “Drive A” to “None”
  • Set “Floppy 3 Mode Support” to “Disabled’ 
  • Set “Halt On” to “All, But Keyboard” 
  • Advanced BIOS Features: 
  • 1. Set “First Boot Device” to “Hard Disk” 
  • Set “Second Boot Device” to “CDROM” 
  • Set “Third Boot Device” to “Disabled” 
  • Set “HDD S.M.A.R.T. Capability” to “Enabled”
  • Set “Limit CPUID Max. to 3” to “Disabled” 
  • Set “No-Execute Memory Protect” to “Enabled” 
  • Set “CPU Enhanced Halt (C1E)” to “Enabled” 
  • Set “CPU Thermal Monitor 2 (TM2)” to “Enabled” 
  • Set “CPU EIST Function” to “Enabled” 
  • Set “Virtualization Technology” to “Enabled” 
  • Set “Full Screen LOGO Show” to “Disabled” 
  • Set “Init Display First” to “PEG” 
  • Execute Disable Bit to “Enabled”
  • Integrated Peripherals: 
  • Set “SATA AHCI Mode” to “AHCI” 
  • Set “SATA Port0-1 Native Mode” to “Enabled” 
  • Set “USB Controller” to “Enabled” 
  • Set “USB 2.0 Controller” to “Enabled” 
  • Set “USB Keyboard Support” to “Enabled” 
  • Set “USB Mouse Support” to “Enabled” 
  • Set “Legacy USB storage detect” to “Enabled” 
  • Set “Azalea Codec” to “Auto” 
  • Set “Onboard H/W LAN” to “Enabled” 
  • Set “Onboard IDE Controller” to “AHCI” 
  • Set “Onboard Serial Port 1” to “Disabled"
  • Set “Onboard Parallel Port” to "Disabled” 
  • Power Management Setup: 
  • Set “ACPI Suspend Type” to “S3(STR)” 
  • Set “Soft-Off by PWR-BTTN” to “Instant-Off” 
  • Set “PME Event Wake Up” to “Disabled” 
  • Set “Power On by Ring” to “Disabled” 
  • Set “Resume by Alarm” to “Disabled” 
  • Set “HPET Support” to “Enabled” 
  • Set “HPET Mode” to “64-bit mode” 
  • Set “Power On By Mouse” to “Disabled” 
  • Set “Power On By Keyboard” to “Disabled” 
  • Set “AC Back Function” to “Soft-Off”
  • II. Example
  • 바닐라 커널에서 Nx/Dx를 활성화하기 위해서는
  • 부팅옵션에 “”cpus=1“” 옵션주고 부팅시도해 본다.
  • 혹은 Advanced Setup 들어가서 Execute Disable Bit 을 Enable 로 설정해준다.
  • III. Example
  • 위 CMOS SETUP이 완벽하게 끝났음에도 불구하고 설치도중 다음과 같은 에러메시지가 발생한다면 손!
  • “”using 16384 buffer headers and 4096 cluster io buffer headers.“”
    이 글이 도움이 되었다면 아래 추천 꾸욱 눌러 주세요.


:
Posted by Ritz®™