P5Q 해킨토시 설치하기

Update :  http://cafe.naver.com/uefi/5370

cmos Setup

The hard disk must be set on AHCI mode. This was already my usual mode, no changes here.

This is the whole list of settings I use (what is not included here, makes no difference for OsX, or so I think):

• Main
  • Storage information
    • Configure SATA as: AHCI
    • HD write protect: Disabled
    • IDE detect time out: 0
  • AHCI configuration
    • CD/DVD time out: 0
• AI Tweaker (I am using DDR2-1066): set dram timing control as manual: 5-5-5-15-3-52-6-3
• Advanced
  • Onboard devices conf
    • HD Audio: Enabled
    • Front panel type: HD Audio
    • Marvel IDE: Disabled
    • Marvel LAN1: Enabled (associated LAN BOOT ROM: Disabled)
    • Marvel LAN2: Enabled (associated LAN BOOT ROM: Disabled)
    • LSI Firewire: Enabled
    • Serial port: Disabled
  • USB Configuration
    • USB: Enabled
    • 2.0 Controller: Enabled
    • 2.0 Controller mode: HiSpeed
    • EHCI Hand off: Enabled
    • Legacy support: Auto
  • Plug & Play: Yes
• Power
  • Suspend mode: auto
  • Report Video: no
  • ACPI 2.0 support: Enabled
  • APIC support: Enabled
  • APM Configuration
    • Power off, everything disabled