달력

5

« 2024/5 »

  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
2009. 12. 17. 19:17

Beta Universal 46xx install package Hackintosh/Graphic Card2009. 12. 17. 19:17

First of all, thanks q64ceo,

우선, HD 46XX Mobility는 죽어도 안잡힙니다.  괜한 시간낭비하지 마세요.
q64ceo comment:

Here it is.

SNOW LEOPARD ONLY. You still need to download
PC-EFI 10.5 and add "GraphicsEnabler=Y" to com.apple.Boot.plist

Please keep listing your Device ID's in this thread


Known cards that work:

Asus EAH4650 (VGA works best, to use HDMI or DVI, both cables must be plugged in at the same time


Attached File(s)

Updated December 17 2009: Released version .3 beta


❶ if you boot and get a black screen, try a different output, i/e VGA or DVI or HDMI.
❷ If that doesnt work, boot with the -x flag at the darwin prompt and remove the ATI4600Controller and ATIRadeon200X kexts

1. 만약 검은 화면을 만나시게 된다면, 다른 포트에 연결하여 보세요. 이를테면 VGA/DVI 혹은 HDMI 포트에 연결하세요.
2. 만약 그래도 동작하지 않는다면 "-x" 혹은 "-x -f"부팅옵션을 주어 안전모드로 부팅한후에 ATI4600Controller 와 ATIRadeon200X kexts 두 화일을 제거한 후에 재부팅하여 보세요.
3. 이 화일은 Snow Leopard에서만 적용될 수 있으며 Chameleon RC-2이상 과 PC-EFI 10.5 를 적용한 후에 "GraphicsEnabler=Y"com.apple.Boot.plist 에 적용한 다음, 재부팅하여 확인할 수 있습니다.
4. 피드백을 남기실때는 업체명, device id와 결과를 알려주시면 개발하는데 많은 도움이 될 수 있습니다.

기타 도움이 될 만한 글들.:

설치하기전에 먼저 확인해야할 사항 구글링 5종세트 
메인보드별 설치방법
 370만원대의 OSX 를 내PC에 설치하는 방법  
 x86osx : Partition 설정하는 방법
 x86osx : 부팅안될시 추가 조치 방안-Ver 02



:
Posted by Ritz®™
2009. 12. 8. 08:01

Setup Geforce 8xxx-9xxx GT Hackintosh/Graphic Card2009. 12. 8. 08:01

You can get your 8600GT including 8XXX-9XXX series video card working using one of following methods in Snow Leopard.
➊ - Patch DSDT with the video
➋ - Add device (EFI) string to com.apple.Boot.plist
➌ - Chameleon's current auto injection of video / network works if your hardware is identified on PCIroot0 (you can check this in IORegistryExplorer). If your hardware is on PCIroot1 then you might have to use Netkas' PC EFI v10.n. Add GraphicsEnabler=Yes to your com.apple.Boot.plist for Chameleon 2.0-rc3 to inject the device properties.

➍.- After upgarding to 10.6.2, it sometimes did not work EFI String.

- remove nVidia kexts then install 10.6.1 nVidia kexts.

- or remove EFI String in com.apple.Boot.plist and Add GraphicsEnabler=Yes to your com.apple.Boot.plist then add your device-id in Geforce.kext, NVD*

- 10.6.1 NVDAResman.kext (6.0.6) and NVDANV50Hal.kext (6.0.6) in here. installing them in the /Extra/Extensions folder, with a properly configured boot cache will solve the issue. There is no need to install the kexts in /System/Library/Extensions, as the /Extra/Extensions folder will work.

- several 9800 Gt 1024 MB or 512 MB works just fine in 10.6.2 with ATY_init.kext enabler.


* Leopard 10.5.6 이상인 경우에는 위 과정 생략하고 아래과정부터 진행하세요.

 

Following is one of them for EFI string to com.apple.Boot.plist


1. Start OSx86 Tools then click Add EFI Strings/Boot Flag

2. Click GFX String


3. Click Choose.

4. Select your Graphic Card




GFX-String

5.


6.



7.


8. Copy and Paste com.boot.Apple.plist file from /Darwin to /Library/Preferences/SystemConfiguration/


:
Posted by Ritz®™
이 방법보다는 다음링크를 참조하여 "Graphic Enabler" 를 이용하여 설정하여 본다음 안된다면 차선책으로 이용하세요.


 

Requirement:

우선 Leopard가 설치되어 있다는 전제하에 GTS 250 그래픽 카드를 설정하여 주는 방법입니다.

Snow Leopard, 10.6.2 에서는 적용 안되는 경우도 있습니다.

그리고 nvidia 그래픽 카드의 드라이버는 원본 파일 그대로를 사용합니다.

혹여 그래픽 카드를 위해 해킨용 그래픽 카드 드라이버(NVInject, NVKush, Natit.kext 등)를 설치하였다면 제거하여 주시고 또는 원본이미지에서 추출하여 설치하여 주십시요.

당근 9800 계열 그래픽 카드도 마찬가지 방법입니다만, 9800 계열은 아래 링크된 툴이 달라지므로 아래 GFX String은 다운로드 하지 마시고 9800전용으로 받으시면 됩니다.

당근 10.5.7 버전 이후부터 이 방법을 사용합니다. 10.5.8 권고.

기존에 이것저것 잡다하게 Nvidia 관련 설치한 드라이버가 있었다면 다 제거하여 주시고 순수한 Retail 드라이버를 이용하셔야 합니다.

준비물.

- GFX String 다운로드 받기 << GTS-250용 EFI String, 자기 카드에 맞는 드라이버를 다운로드 하세요.

- GFX String 다운로드 받기 << GTS-260용 EFI String, 자기 카드에 맞는 드라이버를 다운로드 하세요.

- GFX String 다운로드 받기  << GTS-280용 EFI String

- Files for Quadro FX 4500 512mb cards:Click to Download

- Path Finder



1. 다운로드 받은 파일을 적당한 곳에 풀어주면 다음과 같은 화일이 보일 것입니다.


2. 터미널을 이용하여 다음과 같이 명령어를 실행합니다. 그래픽 카드가 장착된 pci 슬롯을 확인하기 위한 작업입니다.

Open a terminal and enter commands

./gfxutil -f display



3. 터미날에서 DevicePath 부분의 “PciRoot(0x0)/Pci(0x1,0x0)/Pci(0x0,0x0)” 부분만 복사하여 in.plist 화일의 아래 그림과 같이 해당하는 부분에 붙여준다.

Text Editor를 사용해도 좋습니다.


4. 다음은 in.plist 화일 하단의 Model Name등을 다음과 같이 원하는 값으로 수정하여 줍니다. Text Editor를 사용해도 좋습니다.

<key>model</key>

<string>NVIDIA GeForce GTS 250 1024MB</string>

<key>name</key>

<string>NVDA,Parent</string>

<key>rom-revision</key>

<string>3172a</string>



5. in.plist 화일 수정을 마치고 나면 EFI-String 값을 얻기 위하여 다음과 같은 명령어를 입력합니다.

Open a terminal and enter commands


./gfxutil -i xml -o hex ./in.plist ./output.hex


6. 새로이 만들어진 out.hex 화일을 텍스트 에디터 등으로 열어 확인하고 내용을 복사(CMD+C)합니다.


7. /Library/Preferences/SystemConfiguration/com.apple.Boot.plist 화일을 vi나 텍스트 에디터등으로 열어봅니다.

다음은 일반적인 화일내용입니다.

###############################################################

<key>Kernel Flags</key>

<string>Yes</string>



8. /Library/Preferences/SystemConfiguration/com.apple.Boot.plist 화일을 vi나 텍스트 에디터등으로 열어 다음과 같이 device-properties 항목을 추가하여 줍니다.



Reboot!


:
Posted by Ritz®™
2009. 7. 13. 16:54

9800 GT 설정하기 Hackintosh/Graphic Card2009. 7. 13. 16:54

여러가지 사안을 고려하여 이번에도 어쩔 수 없이 9800 GT 를 설치하게 되었습니다.

기타 드라이버 설치없이 GFX-String 만으로 간단하게 잡히는 카드가 매력 있습니다.


:
Posted by Ritz®™

Weird,

It really need HDMI2DVI terminator.

By remote access, it seems to be working, but, there is nothing in main Display.

If I installed Terminator, it'll be display......Maybe..



:
Posted by Ritz®™

OMG!

I Followed drumthrasher109's guide. as followings.

http://www.insanelymac.com/forum/index.php?showtopic=155477


But, I have followings Black Screen in Normal Booting.  

OMG, I success booting as safe mode.


So I try to replace OpenGL FrameWork.





:
Posted by Ritz®™
:
Posted by Ritz®™

오늘 부터 이거 삽질입니다.

512G는 쉽게 되는 것으로 알고 있는데 이 모델은 또 흥미거리군요.

:
Posted by Ritz®™