MSI Eclipse SLI x58에 해킨토시 설치하기

Spec: MSI Eclipse SLI x58, ICH10R, 6 SATA INTEL, 4 SATA + 2 eSATA, four SATA and IDE JMicron, its X-Fi PCI Express extrem. 
CPU: Intel Core i7 920 @ 3.2 Ghz, Intel boost activated, HT enabled 
RAM: G. Skill DDR 3 3x1Go 1600Mhz 
CG: 1GB ATI HD4890 
WiFi: D-Link PCI Express DWA547 
That the rest is useless to say because it has no connection with OSX. 

Prerequisites: 
V7 * iATKOS 10.5.7 
* MSI.zip 

Installation: 

1) Starting the iATKOS DVD v7, press F8 before the counting is finished and type: 

CODE

-V cpus = 1 = 20 busratio

Warning qwerty keyboard (= is left of the button back / del) 

2) Once booted, go into disk utility and format the hard disk MBR or GUID 

3) During installation, after selecting the hard drive, click on "customize" and check: 
* Bootloader: 
Camel v2 
* X86 Patch 
/ Extra Directory 
Decrypters => AppleDecrypt 
Kernel => 9.7.0 Kernel Voodoo 
ACPI => APIC Driver 
Disabler 
OHR 
Remove TyMCE 
* Drivers 
VGA (select according to the graphics card, ATI so here => ATI HD) 
SATA / IDE => AHCI 
=> Intel SATA / IDE 
=> JMicron SATA / IDE 
Sound => Voodoo HDA (AND YES ON THE X-FI WITH THIS IMPEC kext! Even if it is marked inconsistent everywhere) 
Nextwork / Wired / Realtek => Realtek R1000 
 

* Post-Install Actions (leave unchecked) 

Installation takes just under 20 minutes (make disregard for the verification, DVD) 

5) Once installation is complete, will show the timer chaemeleon must type quickly: 

CODE

-V cpus=1 busratio=20

Warning qwerty keyboard (= is left of the button back / del) 

6) OS X will start, make your user account etc. ... 

7) Once in office, transferred using a USB MSI.zip and unzip on the desktop. 
It contains: 
48x0 (is used to detect all the cards from the 4800 Series) 
DSDT.aml (patched by myself for the MSI Eclipse SLI attention only works for this motherboard, for others to see *) 
Extra (contains everything needed to install a retail store) 

8) Copy DSDT.aml the root of the drive, allowing you to stop using the kernel flags (-v cpus = 1 busratio = 20) and thus have enabled the 8 hearts (4 cores, 4 logical) 

9) Use a software like exchange finder to show hidden files and show Extra that folder is the root of the hard disk. Also copy all the files in MSI.zip / Extra overwrite existing files. 

9a) to install the kext of the 4800 Series present in MSI.zip use kexthelper or OSX86Tools 

10) Reboot and cross your fingers. 

11) Once on the desktop look good if it works (4 core and QE / CI in system profiler) 

12) That's what happens when ends: 
 Image_1.png (788.25K) Number of downloads: 241 
 Image_2.png (1.34MB) Number of downloads: 198 


*) To patch the DSDT i7 

1) Download DSDT_Patcher1.0.1e.zip 

2) Take "DSDT_Patcher1.0.1e.zip" and extract it on the desktop in a folder named (default) "DSDT_Patcher1" 

3) start the DSDT patch and when they ask what do you emulate OSX enter "0" to emulate Darwin OS. 
Once complete, exit the terminal 

4) Reopen the terminal and type: 

CODE

cd Desktop/DSDT_Patcher1

Enter 

CODE

nano Debug / dsdt.dsl

Enter 

5) Delete all lines containing the aliases (below each line with processor) 

6) Once all removed, press "Ctrl + O" and then "Enter" (to save) and then apuuyer "Ctrl + X" to close the command nano 

7) Following in the terminal, type (or copy / paste): 

CODE

. / DSDT \ Patcher Debug / dsdt.dsl

8) Normally it gives 3 errors about files not existing, it does nothing. 

9) Reopen the terminal and type: 

CODE

DSDT.aml cp / DSDT.aml

10) is finished, the DSDT is patched for your motherboard, now you can start without bootflags and finally have all of the cores activated.