| iTunes 9.0.2 (0) | 2009.10.30 |
|---|---|
| 10.6.2(10C535) (0) | 2009.10.30 |
| 1Password Update (0) | 2009.06.09 |
| New Mac Book in WWDC 2009 (0) | 2009.06.09 |
| 충격적인 소식 (0) | 2009.06.02 |
cp ~/Downloads/SLStuff/boot /
 |
This image has been resized. Click this bar to view the full image. The original image is sized 1280x800. |
| KextUtility.v2.3.2.full.Snow.Leo.x64.ready.by.cVad .dmg.zip (0) | 2009.07.13 |
|---|---|
| 10A394? (0) | 2009.07.05 |
| 과연 10A372가 나올 것인가? 10A355이후 버전이라면,,,, (0) | 2009.06.06 |
| 과연 10A372가 나올 것인가? 10A355이후 버전이라면,,,, (5) | 2009.06.06 |
| Snow Leopard에 3G 탑재? (0) | 2009.05.08 |
Instructions for Saving The Existing Rom on your Card
1. Create a Windows start up floppy disk.
2. Download the latest version of NVFLASH utility.
3. Copy the two downloaded files onto the floppy disk.
4. Place the Floppy into your computer, go into the bios (usually pressing the "Delete" button at startup and make sure the
computer is set to boot from your floppy disk drive.
5. The computer will boot from the floppy and you will hear the floppy disk being accessed.
6. When you get to the A: prompt, type the following;
eg ; nvflash -b save.rom
(leave a single space between as I have above or it will not work)
Remove the startup disk & reboot your computer, your rom will have been saved to the floppy disk.
Instructions for Flashing a New Rom to your Card
1. You need a Windows startup Disk again. If you have not already made one, copy steps 1 to 3 above then copy you new
Rom onto the disk as well.
2. Place the Floppy into your computer, go into the bios (usually pressing the "Delete" button at startup and make sure the
computer is set to boot from your floppy disk drive.
3. The computer will boot from the floppy and you will hear the floppy disk being accessed.
4. When you get to the A: prompt, type the following;
nvflash -4 -5 -6 -j romname.rom
(leave a single space between as I have above or it will not work. * romname, needs to be replaced with the actual name
of the rom you are flashing eg: nvflash -4 -5 -6 -j 5500.rom )
(leave a single space between as I have above or it will not work)
If you are flashing a rom such as the special roms above you will get two warnings. You will have to hit the "y" key 3
times as the device id and on some the vendor id is changed to nv The screen may go blank while the rom is flash When
nvflash has finished, remove the floppy disk and restart your computer. Your screen should burst into life.
What to do if your flash goes wrong. Even if you have no picture, you can bring your card back to life by following this procedure to the letter.
1. Don't panic. Get access to another PC You should have backed up your rom, Yes. Good go to step 3. Well if you didn't, go here & drill down to the manufacturer of your card and download the bios of your graphics card: http://www.mvktech.net/component/option,com_remository/Itemid,26/func,selectfolder/cat,4/
2. Rename the rom to something you remember if needed like:
romname.rom
It must finish with .rom & there must be no spaces. Place this onto a windows boot floppy with the latest version of Nvflash. http://www.softpedia.com/get/Tweak/Video-Tweak/nVFlash.shtml
3. Startup your computer, there will be no picture but don't worry, you are going to do this blind. You should hear the floppy disk being accessed & watch the light carefully. When and only when it goes out you can type the following:
nvflash -4 -5 -6 -j romname.rom
then hit return. You will hear the floppy disk accessing for a while and eventually the light will go out. At this point you will press the "Y" key on your keyboard. It should BEEP. If it does not, as can happen with a really bad flash press it again and it should BEEP. After a few seconds, the little light on the shift key on your keyboard will start flashing. When both it and the floppy light have gone out you are done. You can restart your computer & hopfully the screen should light up. |
| EmTek Radeon HD 4870 XENON Live II Extreme D5 1GB TWIN Cool (0) | 2009.07.09 |
|---|---|
| EmTek Radeon HD 4870 XENON Live II Extreme D5 1GB TWIN Cool (0) | 2009.07.09 |
| GTX시리즈 드라이버가 나왔군요. (0) | 2009.05.29 |
| New universal Injector for ati and nvidia, and multiple ati cards enabler. (0) | 2009.05.28 |
| Callisto driver (0) | 2009.05.17 |
설치시에는 AHCI, IDE 설정이 필요없습니다.
| efi driver (0) | 2009.10.25 |
|---|---|
| XPC Gui v0.50a (0) | 2009.10.21 |
| XPC 설치 (0) | 2009.05.18 |
| UEFI(XPC) 설치방법 (0) | 2009.05.18 |
| 0.45 x64 bugfix 2 (0) | 2009.05.06 |
Mac 에서 Microsoft Exchange Server와 연동하기
I. Mac 에서 Microsoft Exchange Server와 연동하는 방법
1. pop3를 이용하여 Mail.app와 연동한다.
2. MS-Office for MAC 의 Entourage를 이용하여 Exchange Server와 연동한다.
II. 기존 OutLook 클라이언트의 메일 사이즈가 5G가 넘을 경우 어떤 방법을 이용하여 Mac으로 옮길 수 있을까요?
1. 임시 Exchange Server를 이용한다.
- 네, 임시 Exchange Server를 설치한 후, OutLook 클라이언트에 있는 메일을 전부 임시 Exchange Server로 옮긴다.
- Mail.app에서 임시 Exchange Server와 연동하여 메일을 다운로드 받는다.
* Exchange Server 설치에 능하신 분은 일도 아니겠지만, 처음 대하시는 분은 아픔이 있을 수도 있습니다. 저라면 이 방법을 권해드리겠습니다.
2. Hotmail을 이용한다.
- OutLook을 Hotmail과 연동한다.
- OutLook의 메일을 적당한 크기(2G미만)로 분리하여 Hotmail 로 업로드 한다.
- MAC에서 MS-Office for MAC 의 Microsoft Entourage를 이용하여 Hotmail에 연결하여 메일을 다운로드 받는다.
- Microsoft Entourage의 Export 기능을 이용하여 메일을 Export한다.
- Mail.app 에서 Export한 메일파일을 Import한다.
| 한글 입력기 바람 (0) | 2009.10.21 |
|---|---|
| Linkinus 2.0.1 많이 발전했군요. (0) | 2009.07.10 |
| 자산관리 프로그램 (0) | 2009.06.12 |
| WWDC 2009 Live (0) | 2009.06.09 |
| Blogo 1.2.7 (3085) (0) | 2009.05.27 |
16 GBDe iPhone 16 GB krijgt meer dan alleen de 3.0-software.
Een 3.0 megapixelcamera met autofocus, kompas-functionaliteit en
notification services zijn maar een paar voorbeelden waarom dit een
revolutionaire telefoon is.
| Specificaties | |
| 3.0 megapixelcamera met autofocus | HSDPA 7.2 MBit/s |
| Videocamera | Wi-Fi |
| Kompas-functionaliteit | Multi-touch-breedbeelddisplay |
| 16 GB opslagcapaciteit | Bluetooth |
| It's time to buy iPhone in Korea (0) | 2009.11.24 |
|---|---|
| iPhone 예약 가입 준비 (0) | 2009.11.17 |
| iPhone 3G S Specification -1 (0) | 2009.06.12 |
| iPhone 3G 한국 출시? (0) | 2009.06.06 |
| iPhone에서의 GPS관련 15 개의 사용량 많은 응용프로그램 (0) | 2009.05.07 |
De hardware van de iPhone 8 GB verandert niet. Het toestel wordt
wel geleverd met de unieke 3.0-software. Dit maakt mms’en, e-mail
notifications en knippen en plakken van teksten mogelijk. Daarnaast
kun je je iPhone erg gemakkelijk doorzoeken met Spotlight.
| Specificaties | |
| 2.0 megapixelcamera | Multi-touch-breedbeelddisplay |
| Safaribrowser | Mp3-beltonen |
| Wi-Fi | Bluetooth |
| UMTS/HSDPA | 8 GB opslagcapaciteit |
32 GBEen ongekend hoge opslagcapaciteit, 32 GB. Dit maakt de iPhone
uitermate geschikt voor het opslaan van foto’s, muziek en Apps.
Wat je ook doet, je hoeft je nooit meer zorgen te maken dat je iPhone
volraakt. Uiteraard krijg je bij de iPhone 32 GB de nieuwe 3.0-software.
| Specificaties | |
| 3.0 megapixelcamera met autofocus | HSDPA 7.2 MBit/s |
| Videocamera | Wi-Fi |
| Kompas-functionaliteit | Multi-touch-breedbeelddisplay |
|
32 GB opslagcapaciteit |
Bluetooth |
| iPhone 예약 가입 준비 (0) | 2009.11.17 |
|---|---|
| iPhone 3G S Specification -2 (0) | 2009.06.12 |
| iPhone 3G 한국 출시? (0) | 2009.06.06 |
| iPhone에서의 GPS관련 15 개의 사용량 많은 응용프로그램 (0) | 2009.05.07 |
| iPhone (0) | 2009.04.18 |
| Linkinus 2.0.1 많이 발전했군요. (0) | 2009.07.10 |
|---|---|
| Mac 과 Exchange 연동 (0) | 2009.06.12 |
| WWDC 2009 Live (0) | 2009.06.09 |
| Blogo 1.2.7 (3085) (0) | 2009.05.27 |
| Adium 1.4 beta support Twitter, IRC (0) | 2009.05.19 |
|
