달력

11

« 2024/11 »

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
2009. 11. 22. 07:46

HP 2133 with OSX? Hackintosh/NoteBook2009. 11. 22. 07:46

Thanks daniel.azy



As far as i know, underattacker (boostedboogie on this forum i think) managed to get OSX running on his 2133.

he mentioned using essentially the same tutorial as he did with an EEE pc to get it running, but didn't detail any tutorial.

that being said, i think he did manage to get wifi and sound working, but was stuck with VESA drivers because there is no driver for the VIA graphics card.

i think it might break the webcam and card reader too, but don't quote me on that.

I personally never got past the iDeneb boot screen and gave up after a while.

I believe it is possible to get OSX on the 2133 with some shoe-horning.

I'm just now sure if anyone else has done it or whether the process is worth the trouble to have been detailed out online.

try www.underattacker.com for his blog posts on getting OSX on the 2133. another point of reference is the OQO2 forum where they managed to get OSX running on essentially the same hard.ware (Via 1.2ghz chrome9 graphics) as the 2133. Both these methods still limit the laptop to non-native VESA resolution.

, , , , ,

'Hackintosh > NoteBook' 카테고리의 다른 글

Sony Vaio CR11z, CR21z, CR31z with ATI X2300 and Snow Leopard  (0) 2009.12.07
DELL M1210 OS X SETUP  (0) 2009.12.06
HP CQ40  (0) 2009.11.05
Toshiba Satellite A300-1N8  (0) 2009.10.29
HP Compaq nx7400 laptop  (0) 2009.10.27
:
Posted by Ritz®™
2009. 11. 5. 09:47

HP CQ40 Hackintosh/NoteBook2009. 11. 5. 09:47

HP CQ40

설치 이미지 : Leopard 10.5.7 retail 과 vanilla kernel


- Video GMA x4500mhd (2a42:8086)
- sound IDT -->VoodooHDA 0.2.2 Work!
- Ethernet work!
- Wlan Broadcom Work!
- Bluetooth Work!
- Touchpad Work!
Video Card만 빼고 나머지는 잘 되는 군요.

Tiennek with patch 20090704.2 를 사용한 결과로는

kext 는 정상적으로 로딩되는 것 같고
해상도 (1280x800) 으로 설정해서 잘 되지만 마우스 커서 문제가 발생하는 군요.

, , , , , , , , , , , , , , ,

'Hackintosh > NoteBook' 카테고리의 다른 글

DELL M1210 OS X SETUP  (0) 2009.12.06
HP 2133 with OSX?  (0) 2009.11.22
Toshiba Satellite A300-1N8  (0) 2009.10.29
HP Compaq nx7400 laptop  (0) 2009.10.27
Guide to 10.6 Snow Leopard Install on a Dell Vostro 1500/1700 or Inspiron 1520/1521/1720/1721  (0) 2009.10.26
:
Posted by Ritz®™
2009. 10. 29. 08:51

Toshiba Satellite A300-1N8 Hackintosh/NoteBook2009. 10. 29. 08:51

  1. iDeneb 10.5.5, iPC 10.5.6, iATKOS 10.5.6 이미지를 가지고 설치시도 하여 보았지만, iDeneb v1.4 10.5.6에서만 설치성공하였습니다.
  2. 사용자화에서 ich-Fix등 기본적인 항목 체크, 특히 RTL1000 선택하여 Ethernet Card도 동작이 잘되고 배터리 상태 정보도 잘 표시됩니다.

  4. Problems:
    사운드 카드가 잡히질 않았습니다.
    그래픽은 "1024 x 768"로만 동작이 되는 군요.
  5. com.apple.Boot.plist 를 만져 줘야 하겠습니다.

  6. "About this Mac" 에서는 2 Ghz 가 1 GHz 로 보이는 군요.
  7. "About This Mac"관련 패치를 해줘야 하겠지만, 나중에 잡다한 버그가 생긴다고 해서 큰 문제가 아니니 그냥 사용하기로 하였습니다.

    USB 메모리 스틱이 안혀서 "-f"를 시도해보아야 겠군요. USB 마우스는 동작합니다.
    Bluetooth 와 WiFi 는 동작하지 않습니다.

    Ctrl 키가 안먹히는 것 같은데 Expose/Space를 설정하여 확인하여 보아야 겠습니다.

Spec:

 

Processor 
Processor family                T3200 
Processor clock speed           2000 MHz 
Processor front side bus        667 MHz 
Processor manufacturer          Intel® 
Motherboard manufacturer        Intel® 
Chipset                         Mobile Intel® GL40 Express Chipset 
L2 cache

SATA2 hard disk drive (250 GB)
SATA DVD-RW drive

Display resolution:             1280 x 800
Graphic adapter:                Mobile Intel® GMA 4500M 

Audio system:                   Realtek ALC268-GR 
Audio compression formats:      24-bit stereo 

Wired communication chipset:    RTL8102E 

Wireless communication version: RTL8187B; 2.1 + EDR 

BIOS ACPI:                      Yes, BIOS advanced power management:   No


, , , , , ,

'Hackintosh > NoteBook' 카테고리의 다른 글

HP 2133 with OSX?  (0) 2009.11.22
HP CQ40  (0) 2009.11.05
HP Compaq nx7400 laptop  (0) 2009.10.27
Guide to 10.6 Snow Leopard Install on a Dell Vostro 1500/1700 or Inspiron 1520/1521/1720/1721  (0) 2009.10.26
Acer Aspire Laptop 시리즈  (0) 2009.10.25
:
Posted by Ritz®™
2009. 10. 27. 21:51

HP Compaq nx7400 laptop Hackintosh/NoteBook2009. 10. 27. 21:51

I. 첫번째 설치

설치 이미지 : iDeneb 1.3 (10.5.5)

시스템 : HP Compaq nx7400 laptop.


II. 재시도

specs:

HP Compaq nx7400
Intel C2D T7200 @2GHz
3GB 667MHz RAM
HDD WD 320GB SATA
Intel GMA950 & WSXGA+ screen
Intel 3945ABG WiFi
Broadcom 440x Ethernet
ADI1981 audio
Wireless USB Linksys WUSB54GC (Ralink)
설치이미지 : iDeneb v1.3 10.5.5.

Hardware issues:
  1. cpus=1:
    항상 부팅 플래그를 "cpus=1" 을 주어서 부팅해야 합니다.
    Chameleon with DSDT override 와 DSDT patcher 1.0.1d 또한, vanilla 커널과 voodoo_beta2c 9.5.0 커널을 적용하여 보았지만 불안정하게 운용이 됩니다..
    잠자기는 잘 되고 있습니다.
    참고: http://forum.insanelymac.com/index.php?s=&...st&p=962566
  2. Broadcom 440x ethernet:
    불안정하여 한시간마다 재부팅하여 주면 작동이 됩니다. 인터넷에서 다운로드 도중에 멈추어서 USB wifi 카드를 이용합니다.
  3. Intel 3945ABG:
    동작하지 않는 군요.
  4. Audio:
    Headphones/mic 동작하지 않고, 스피커는 adi1981 드라이버를 이용하여 작동이 됩니다.
  5. Shutdown:
    하드드라이버는 멈추었다 깨어나기를 반복하는 듯 보입니다.
  6. 터치패드는 ACPIPS2Nub.kext 와 수정된 ApplePS2Controller.kext 를 이용하여 동작이 됩니다.



'Hackintosh > NoteBook' 카테고리의 다른 글

HP CQ40  (0) 2009.11.05
Toshiba Satellite A300-1N8  (0) 2009.10.29
Guide to 10.6 Snow Leopard Install on a Dell Vostro 1500/1700 or Inspiron 1520/1521/1720/1721  (0) 2009.10.26
Acer Aspire Laptop 시리즈  (0) 2009.10.25
New Challenger for good NoteBook  (0) 2009.04.21
:
Posted by Ritz®™
2009. 10. 26. 15:37

Guide to 10.6 Snow Leopard Install on a Dell Vostro 1500/1700 or Inspiron 1520/1521/1720/1721 Hackintosh/NoteBook2009. 10. 26. 15:37

I. Guide for Dell Vostro 1500


Requirement : iAtkos 7 dvd로 설치

Customised Option 사용자화 선택사항


Chameleon 2
/Extra
DSDT
AppleDecrypter
Disabler
OHR (didn't work)
BroadCom 440x
VoodooHDA

Additional(추가사항) :VoodooBattery 설치

For Graphic Card : EFI string 설정 8600GT.

II. Guide to 10.6 Snow Leopard Install on a Dell Vostro 1500/1700 or Inspiron 1520/1521/1720/1721


Note : Thanks xenocide100588, This guide ASSUMES that you are installing fresh.

REQUIRED:
Copy of Snow OSX 3.5 Univeral(10.6), which is 10.6. There is a version out (3.6). Download: The Distro is very easy to Find on Torrentz or Piratebay. Google is no evil
Linux Distro Live CD (to fix a kernel panic later)
Attachments : DownLoad Kext
update Attachments Apr-29, 2001  : DownLoad Kext
 - natit.kext ; For Graphic card
 - AppleBCM440XEthernet.kext_snowleo32_64.zip ; For Network Card
 - You can install these two kext by kext helper or Kext UtilityEDIT: Make sure to get the FEDORA 12 live disk.... It supports HFS+(non-journaled) with read and write!!

http://download.fedoraproject.org/pub/fedo...2-i686-Live.iso
https://fedorahosted.org/liveusb-creator/
Optional (if you want wireless internet)

A Dell 1390 Wireless card (search EBAY, $20)
So, you can install this guide. with all that said... Lets get to it.

Step 1: Beginning the install
All kinds of people say "You have to change to AHCI" or "You need EFI emulation!". But no, Snow OSX takes care of the hard stuff in Dell Laptop.

Start out by inserting the DVD and booting from it. Usually, with an Inspiron, you can hit f12 at boot and then select internal CD / DVD. For some reason, my computer takes a long time to boot the disk... no idea why. I have suspicions that it THINKS the DVD is a floppy drive, due to mismatched drivers, but who knows, everything with the DVD drive works fine post-install.

First we want to open the disk utility and partition our drive as this Guide.
And If you have above of 8G USB Memory Stick you can use USB Memory Stick for installing as this guide.

Note: Chameleon 2 does support booting Win-blows XP, Vista, and 7. You'll need a guide for that though, because Snow OSX only comes with Chameleon 1.

*
Ok. After partitioning, we know what is next, make a DSDT.aml. Open a terminal, and type EXACTLY these lines.

-------------------------------------------------------
cd /
sh MakeDSDT SnowOSXPartition
-------------------------------------------------------

-Where SnowOSXPartition is the name that you gave your partition in the previous section

Now, follow the instructions. When asked what OS to emulate, hit 0 (zero) for Darwin.
*

This creates the DSDT from scratch, and matches it to your hardware. Nifty!

Alright, now we have the DSDT and hard drive set up, lets install!
Click continue until you come to the screen that snows an OSX disk, a green arrow, and the hard drive icon.

STOP!!

Do not click install yet. Instead, click customize. Now, you should see two boxes that are unchecked, although I can't remember what the options are. Check both of these boxes so that ALL of the boxes are checked. NOW install!

This process can take anywhere from 15 to 30 minutes, depending on your hard drive speed. So go do something while it installs and check back every few minutes.

------------------------------------------------------------------------------------------------------------

Step 3: Getting the OS to ACTUALLY Boot!

Ok, well, if you've read the guide from TaranFX, then you know that the DSDT doesn't work. Bummer!

But, we can fix that.

*
Download the fixes from http://www.zshare.net/download/69227884288507da/ . These files are zipped, simply unzip them and install the kext file into the System/Library/Extensions folder and repair permissions.
*

What this means is, download the files, and put them on a FAT formatted flash drive. Get a live cd of SOME Linux distro, Ubuntu will work fine (No it wont. Use fedora 12 link provided above), so that we can fix the KP and get you started.

I have provided the kext file with the guide, just to make it easier.
With the live cd in, insert your flash drive containing these files. Mount the partition you created in the previous part (the 200 of 500 MB one) and copy JUST the kext from the zipped files to that partition. Reboot with the Snow OSX disk in.

Once booted, go to the terminal.

We need to pull the file off of that partition and put it in your Snow OSX partition.

Type this into the terminal, Partition is whatever your named your extra one. SnowOSXPartition is whatever you named your Snow OSX Partition (duh).

-------------------------------------------------------
Cd /Volumes/Partition

cp -R IOATAFamily.kext /Volumes/SnowOSXPartition/System/Library/Extensions
-------------------------------------------------------


After that is complete, close the terminal, open the disk utility, and run the Repair Permissions on the SnowOSXPartition.

Now, reboot, and hopefully your Snow Leopard install boots.

If not, please reformat and try Taranfx's install guide, then return to this guide for setup.

------------------------------------------------------------------------------------------------------------

Step 4: Installing necessary kext files (my kexts are attached at the bottom, USE AT YOUR OWN RISK)

Note: I recommend using the include KextUtility (in the ATools folder) to install any and all kext files. Just drag and drop a kext onto the KextUtility icon and let it do the rest. It does prompt you for your password however.

Well, if everything has gone well, then you are now staring at a snow leopard desktop. Although, when you watched that pretty video, there was something missing. Oh yeah that's right..... SOUND!

We can fix that though, but first, we need to make your video pretty.

-Video-

I used the wonderful NVInject (for NVIDIA graphics only), which can be downloaded from nvinject.free.fr .

Alternatively, you can also use the one provided by Snow OSX, which is located in the Applications folder under ATools/Drivers/ .

This wonderful little folder (ATools) includes all kinds of nice little toys to get your computer running smoothly.

If you have an NVIDIA Geforce 8600m GT like I do, then use my kext at the bottom; it includes the fix for Quartz. If not, find a NVInject guide for your card (or search around insanelymac for your specific card).

- Audio -

This is a pretty simple fix. After weeks and weeks of searching forums, botched installs, and many MANY bad words... I finally found a solution that works. But thankfully, we don't need to go into that. Nearly all of the Inspiron/Vostro laptops have an Intel 82xxx series HD audio controller which you might know as Sigmatel STAC92xx.

Just install the provided VoodooHDA.kext to your /System/Library/Extensions directory and be happy!

For those who want to know what fixed it, I used the VoodooHDA.kext provided with Snow OSX, and changed the info.plist a bit to fix a compatibility issue with certain settings. : )

Now that we have sound and video working, the time comes to tackle the problem of Ethernet and Wireless.

- Ethernet -

The Ethernet problem is easy compared to the others. Simply install the attached Broadcom 440x kext that I have provided, and you are GOOD TO GO. Unless of course you, for whatever reason, DON'T have a Broadcom chipset (nearly all Inspiron/Vostro models do), because, in that case, you need to search around for the appropriate fixes.

- Wireless (a.k.a. The Source of Many Nightmares) -

Well, many will tell you that there are beta drivers for your 3945, and you may say, Why would I spend the money to get a new wireless card if mine has drives?

The BETA drivers DO NOT WORK FOR YOUR COMPUTER. At all! But thankfully, the Inspiron laptop is REALLY easy to replace a wireless card it. Check out this guys guide to disassembling an Inspiron 17, and just stop at the wireless card. Reverse his instructions to replace the new one.
http://www.insidemylaptop.com/take-apart-d...ro-1700-laptop/

Very easy to follow, 2 screws, 2 antennas disconnected, pop the old card out, put the new card in, attach the antennas, and put the cover back on. Done deal!

OK, now start your machine again and, dumb apple, Snow OSX should recognize the 1390 as... dun dun dun dun... AIRPORT CARD!

- Battery -

This has frustrated me for weeks, almost months, trying to get a FRICKIN battery to work. Then... I stumbled upon this...

[Guide] Dell Vostro 1400 - Snow Leopard 10.6.2 - Vanilla Kernel 10.2.0, by M0000000000 (just put that in the insanelymac search bar)

I saw the line that says, If the battery doesn't work, install this.

So I did, and it works. The file is attached below, just install and reboot.

------------------------------------------------------------------------------------------------------------

Well, that's it for me! This guide should have helped you a little, and at least given you SOME idea of what to do with Snow OSX and the installer. Hope that it was some help!

first restart, and.... kernel panic wacko.gif You need fedora for replacing kext and DSDT.aml...

III. Dual Booting


*If dual booting, this is the part you may need to think on your own a little. I dual boot with fedora 12, and my partition scheme looks like this.


Disk0s1 - Boot partition (Grub Bootloader) :500MB
Disk0s2 - Fedora 12 x86-64 180GB LVM
Disk0s3 - Shared Partition 106GB HFS+ (F12 allows read and write)
Disk0s4 - Snow OSX 180GB HFS+ Journaled

Yours may look different. One thing you will need to decide is what bootloader to use. If you want grub, either get the grub master disk off of "the T word" or get a Linux distro to dual boot that provides grub (ubuntu, fedora, etc).

I advise leaving a 500MB partition as well as all others, especially if only booting OSX, simply because you can keep important files there, and you can use a live cd to put files there that you may need later. This is necessary for this guide, so make sure to make at least a 200MB if not a 500MB partition (should be formatted to FAT)




IV. USB Fix


Thanks lunch dragon,

I finally got sleep to work on OSX 10.6.2 on my Dell Inspiron 1520.
My configuration is at bottom of this mesage.

The main problem is not NVIDIA graphics drivers. It's the USB controllers that keep waking up the laptop from sleep. It is either the embedded camera or the BlueTooth hardware that does not "sleep properly".

Follow the instructions here to fix USB UHCI/EHCI controller settings. This requires you to set/modify your DSDT.AML file properly.

http://apocolipse.com/?p=14

My BIOS setting was also adjusted for (not sure if these make a difference)
1) USB Wake from Sleep = enabled
2) USB always managed by BIOS at all times = enabled

My guess is this will also work on Dell Inspiron 1720 machines.

QUOTE
Model Identifier: Inspiron 1520 eyW1234567890
Processor Name: Intel® Core™2 Duo CPU T7250 @
Processor Speed: 2 GHz
Memory: 4 GB Bus Speed: 800 MHz

NVIDIA GeForce 8600M GT: 512 MB
Display: Resolution: 1680 x 1050


Quartz/CI is working using NVResman & NVInject64.
Quartz/CI is needed to make sure DVD Player and/or VLC will play video properly.

NVInject64 is modified strings are as follows:
QUOTE
<key>NVCAP</key>
<data>
BAAAAAAAAwAMAAAAAAAABwAAAAA=
</data>
<key>NVPM</key>
<data>
AQAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA==
</data>



The following KEXTS in S/L/E (in addition to other kexts)
VoodooPowerMini
VoodooHDA
VoodooBattery

The following KEXTS in Extra/Ext (see attached picture)

I've attached SOME of the kexts here that are in my configuration. Maybe they'll help others.

'Hackintosh > NoteBook' 카테고리의 다른 글

Toshiba Satellite A300-1N8  (0) 2009.10.29
HP Compaq nx7400 laptop  (0) 2009.10.27
Acer Aspire Laptop 시리즈  (0) 2009.10.25
New Challenger for good NoteBook  (0) 2009.04.21
NC10  (0) 2009.04.16
:
Posted by Ritz®™
2009. 10. 25. 18:57

Acer Aspire Laptop 시리즈 Hackintosh/NoteBook2009. 10. 25. 18:57

I. timeline 3810T

- install XxXOS86 이미지.audio, wifi 그리고 wired lan 실패.

- iDeneb 10.5.8 이미지로 설치시도, 키보드, 터치패드 그리고 사운드 카드 작동, 해상도는 1024 X 768, wlan 인식하지 않음.


II.


III. Acer Aspire Timeline 5810T-944G50MN

- iDeneb v1.5 로 설치시도.

- CMOS 에서 Main: Sata mode -> ACHI 에서 IDE 로 세팅(뭔지는 잘 모르겠지만, AHCI로 설정하면 하드디스크가 안보임)

- 설치과정 참조

- iDeneb DVD로 부팅하여 랭귀지 선택후, Utilities -> Disk Utility 로 가서 맥 파티션을 만들어 준다.

- 사용자화("Custom Installation")를 선택하여 주고

- language 선택

- normal iDeneb install 체크된 것은 그대로 둔다.

- iDeneb patch 를 선택 확장하고

- Fix -> Voodoo Battery Manager 와 IOUSBFamlilyFix 를 선택한다.

- iDeneb DVD를 설치시작한다.

- 재부팅한후 F2를 눌러 CMOS SETUP으로 들어간 후, Main -> Sata mode -> IDE 를 다시 "AHCI"로 세팅한다.

- F10 을 눌러서 변경사항을 저장하고 재시작한다.

- 역시나 WIFI 와 Sound는 동작하지 않는다.




'Hackintosh > NoteBook' 카테고리의 다른 글

HP Compaq nx7400 laptop  (0) 2009.10.27
Guide to 10.6 Snow Leopard Install on a Dell Vostro 1500/1700 or Inspiron 1520/1521/1720/1721  (0) 2009.10.26
New Challenger for good NoteBook  (0) 2009.04.21
NC10  (0) 2009.04.16
NC10에 해킨토시 설치하기  (5) 2009.04.16
:
Posted by Ritz®™
2009. 4. 21. 06:44

New Challenger for good NoteBook Hackintosh/NoteBook2009. 4. 21. 06:44

New Challenger for good NoteBook.

It's really awesome....you know.

Please following product.!!

http://www.newegg.com/Product/Product.aspx?Item=N82E16834220503


'Hackintosh > NoteBook' 카테고리의 다른 글

Guide to 10.6 Snow Leopard Install on a Dell Vostro 1500/1700 or Inspiron 1520/1521/1720/1721  (0) 2009.10.26
Acer Aspire Laptop 시리즈  (0) 2009.10.25
NC10  (0) 2009.04.16
NC10에 해킨토시 설치하기  (5) 2009.04.16
HP Mini 1001TU 와 OSX Leopard  (6) 2009.03.09
:
Posted by Ritz®™
2009. 4. 16. 14:15

NC10 Hackintosh/NoteBook2009. 4. 16. 14:15






, , , ,

'Hackintosh > NoteBook' 카테고리의 다른 글

Acer Aspire Laptop 시리즈  (0) 2009.10.25
New Challenger for good NoteBook  (0) 2009.04.21
NC10에 해킨토시 설치하기  (5) 2009.04.16
HP Mini 1001TU 와 OSX Leopard  (6) 2009.03.09
HP Mini 1013TU  (1) 2009.02.28
:
Posted by Ritz®™

티스토리툴바