달력

12

« 2009/12 »

  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
2009. 12. 25. 02:15

Mery ChristMas !! Hachintosh World!! etc2009. 12. 25. 02:15

:
Posted by Ritz®™
2009. 12. 25. 02:14

Merry Christmas !! etc2009. 12. 25. 02:14

:
Posted by Ritz®™
2009. 12. 25. 02:14

맥에서 커널패닉에 대한 대처 macOS2009. 12. 25. 02:14


뭐 아시는 분들은 대개 다들 아시겠지만,,,:

Snow Leopard(10.6)에서 커널패닉이 일어나는 경우가 있습니다.

시작할때나 혹은 종료를 하고 나면 검은 화면에 컴퓨터 재시작하라는 메시지가 뜨고 멈추어 있습니다.

이런 경우에는 다음과 같이 하여 커널패닉 원인을 찾아낼 수 있습니다.

1. 부팅시에 "-v -f"로 부팅하여 종료하게 되면 화면에 좀더 자세한 커널패닉 관련 메시지가 나옵니다.

2. /var/log/system.log를 분석하여 본다.

3. 드라이버를 설치할때 최근에 설치한 드라이버나 소프트웨어를 제거하여 본다.

4. Little Snitch, CleanApp, Parallels, VMware Fusion, Rubbernet 등의 Growl 에 등록된 프로그램을 제거하여 본다. 여기에 등록된 프로그램은 시스템 시작시에 부팅속도를 느리게 하는 원인이 될 수도 있습니다.

5. 한달에 두번정도는 디스크 유틸리티에서 권한수정을 실행하여 줍니다.

6. 콘솔창을 열어 시스템 로그 화일을 분석하는 능력을 기릅니다. 일반적인 로그와 특정 소프트웨어를 설치하고 난 이후의 로그화일을 비교하면 쉽게 해결방안이 나오는 경우가 많습니다.







물론, 이외에도 다양한 원인으로 커널패닉이 발생하는 데, 이런 경우에는 보통 안전모드나 Verbose 모드로 부팅하여 커널패닉을 일으키는 kext나 혹은 부팅이 지연되는 시점을 파악하여 원인을 분석해야 합니다.

참고 : http://osx86.tistory.com/1116


:
Posted by Ritz®™

Requirement : Chameleon 2.0-RC2~RC4

Symptom:

1. Install Chameleon 2.0.RC2 ~ 4.

2. ati_9442_1002.rom in /Extra/

3. Modify com.apple.boot.plist


com.apple.Boot.Plist(without kernel flags like UUID !) *

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Graphics Mode</key>
<string>1920x1080x32</string>
<key>Kernel</key>
<string>mach_kernel</string>
<key>Kernel Flags</key>
<string>arch=i386</string>
<key>Timeout</key>
<string>2</string>
<key>GraphicsEnabler</key>
<string>Yes</string>
<key>EthernetEnabler</key>
<string>Yes</string>
</dict>
</plist>


/Extra/Store_Kexts/:

-EvoEnabler.kext in S/L/E or /Extra/Store_Kexts/_For_System
-LegacyATI4800Controller.kext in /Extra/Store_Kexts




10.6.2 Working:

1. Good Luck!





:
Posted by Ritz®™
2009. 12. 18. 13:42

USB Boot issue with Chameleon 2.0-RC2~RC4 Hackintosh/Chameleon2009. 12. 18. 13:42

Chameleon 2.0-RC2~RC4

Symptom:

There were some issue, chameleon installed in USB.



Com.apple.Boot.plist:

Check /Extra/com.apple.Boot.plist and /Library/Preferences/SystemConfigurations/com.apple.Boot.plist




Solution:

1. Instsll Chameleon to H.D.D not USB.

2. Modified com.apple.Boot.plist. Remove " <key>USBBusFix</key>" contents.

3. If your Nvidia Graphic card nor working, you should install nvidia.rom file in /Extra folder.



Boot Log.:

Dec 15 13:40:34 localhost kernel[0]: USBF:       1.181   AppleUSBUHCI[0xffffff8049523000]::start unable to initialize UIM
Dec 15 13:40:34 localhost kernel[0]: USBF:      1.182   AppleUSBUHCI[0xffffff8049526000]::start unable to initialize UIM
Dec 15 13:40:34 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Dec 15 13:40:34 localhost kernel[0]: AppleIntelCPUPowerManagementClient: ready
Dec 15 13:40:34 localhost kernel[0]: FireWire runtime power conservation disabled. (2)
Dec 15 13:40:34 localhost kernel[0]: USBF:      1.742   AppleUSBEHCI[0xffffff8009b61000]: unable to get filterInterruptEventSource
Dec 15 13:40:34 localhost kernel[0]: USBF:      1.744   AppleUSBEHCI[0xffffff8009b61000]::UIMInitialize - Error occurred (0xe00002be)
Dec 15 13:40:34 localhost kernel[0]: USBF:      1.750   AppleUSBEHCI[0xffffff8009b61000]::start unable to initialize UIM
Dec 15 13:40:34 localhost kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IDE0@1F,2/AppleAHCI/PRT4@4/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/WDC WD1600BEVS-22RST0 Media/IOGUIDPartitionScheme/Untitled 1@2
Dec 15 13:40:34 localhost kernel[0]: BSD root: disk1s2, major 14, minor 5
Dec 15 13:40:34 localhost kernel[0]: ApplePS2Trackpad: Synaptics TouchPad v7.0
Dec 15 13:40:34 localhost kernel[0]: FireWire (OHCI) VendorID 1180 ID 832 PCI now active, GUID 384fc000297355e1; max speed s400.
Dec 15 13:40:34 localhost kernel[0]: Kernel is LP64
Dec 15 13:40:34 localhost kernel[0]: AppleIntelCPUPowerManagement: initialization complete
Dec 15 13:40:34 localhost kernel[0]: USBF:      6.345   AppleUSBUHCI[0xffffff804951d000]::start unable to initialize UIM
Dec 15 13:40:34 localhost kernel[0]: USBF:      6.418   AppleUSBUHCI[0xffffff8049434000]::start unable to initialize UIM
Dec 15 13:40:35 localhost kernel[0]: systemShutdown false
Dec 15 21:40:00 Ujens-MacBook-Pro kernel[0]: ERROR: FireWire unable to determine security-mode; defaulting to full-secure.
Dec 15 21:40:03 Ujens-MacBook-Pro kernel[0]: Waiting for DSMOS...
Dec 15 21:40:03 Ujens-MacBook-Pro kernel[0]: NVDANV50HAL loaded and registered.
Dec 15 21:40:03 Ujens-MacBook-Pro kernel[0]: Sound assertion "0 != setupHostInterrupt ()" failed in "/SourceCache/AppleHDA/AppleHDA-179.1.4/AppleHDAController/AppleHDAController.cpp" at line 312 goto Exit
com.apple.Boot.plist
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Boot Banner</key>
        <string>No</string>
        <key>Default Partition</key>
        <string>hd(1,1)</string>
        <key>Graphics Mode</key>
        <string>1920x1200x32</string>
        <key>GraphicsEnabler</key>
        <string>Yes</string>
        <key>Kernel</key>
        <string>mach_kernel</string>
        <key>Kernel Flags</key>
        <string></string>
        <key>PciRoot</key>
        <string>0</string>
        <key>Timeout</key>
        <string>3</string>
        <key>USBBusFix</key>
        <string>Yes</string>
        <key>VBIOS</key>
        <string>No</string>
</dict>
</plist>
Modified com.apple.Boot.plist 
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
        <key>Kernel</key>
        <string>mach_kernel</string>
        <key>Kernel Flags</key>
        <string>-pci0</string>
        <key>Timeout</key>
        <string>8</string>
        <key>GraphicsEnabler</key>
        <string>y</string> 
</dict>
</plist>

<?xml version="1.0" encoding="UTF-8"?>

<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">

<plist version="1.0">

<dict>

<key>DSDT</key>

<string>/Extra/DSDT.aml</string>

<key>Default Partition</key>

<string>hd(1,2)</string>

<key>Graphics Mode</key>

<string>1280x960x32@60Hz</string>

<key>GraphicsEnabler</key>

<string>y</string>

<key>Kernel</key>

<string>mach_kernel</string>

<key>Kernel Flags</key>

<string>-x32</string>

<key>Legacy Logo</key>

<string>yes</string>

<key>SMBIOS</key>

<string>/Extra/smbios.plist</string>

<key>Timeout</key>

<string>5</string>

<key>VideoROM</key>

<string>nVidia.rom</string>

</dict>

</plist>

기타 도움이 될 만한 글들 :


:
Posted by Ritz®™
2009. 12. 17. 19:17

Beta Universal 46xx install package Hackintosh/Graphic Card2009. 12. 17. 19:17

First of all, thanks q64ceo,

우선, HD 46XX Mobility는 죽어도 안잡힙니다.  괜한 시간낭비하지 마세요.
q64ceo comment:

Here it is.

SNOW LEOPARD ONLY. You still need to download
PC-EFI 10.5 and add "GraphicsEnabler=Y" to com.apple.Boot.plist

Please keep listing your Device ID's in this thread


Known cards that work:

Asus EAH4650 (VGA works best, to use HDMI or DVI, both cables must be plugged in at the same time


Attached File(s)

Updated December 17 2009: Released version .3 beta


❶ if you boot and get a black screen, try a different output, i/e VGA or DVI or HDMI.
❷ If that doesnt work, boot with the -x flag at the darwin prompt and remove the ATI4600Controller and ATIRadeon200X kexts

1. 만약 검은 화면을 만나시게 된다면, 다른 포트에 연결하여 보세요. 이를테면 VGA/DVI 혹은 HDMI 포트에 연결하세요.
2. 만약 그래도 동작하지 않는다면 "-x" 혹은 "-x -f"부팅옵션을 주어 안전모드로 부팅한후에 ATI4600Controller 와 ATIRadeon200X kexts 두 화일을 제거한 후에 재부팅하여 보세요.
3. 이 화일은 Snow Leopard에서만 적용될 수 있으며 Chameleon RC-2이상 과 PC-EFI 10.5 를 적용한 후에 "GraphicsEnabler=Y"com.apple.Boot.plist 에 적용한 다음, 재부팅하여 확인할 수 있습니다.
4. 피드백을 남기실때는 업체명, device id와 결과를 알려주시면 개발하는데 많은 도움이 될 수 있습니다.

기타 도움이 될 만한 글들.:

설치하기전에 먼저 확인해야할 사항 구글링 5종세트 
메인보드별 설치방법
 370만원대의 OSX 를 내PC에 설치하는 방법  
 x86osx : Partition 설정하는 방법
 x86osx : 부팅안될시 추가 조치 방안-Ver 02



:
Posted by Ritz®™
2009. 12. 17. 06:04

아이폰 폭발? 소비자 과실? Mobile/iPhone2009. 12. 17. 06:04

여러분의 의견은 어떠신지?

사건 경과:

노트북에 연결하여 충전중
책상사이 철에 접지가 살짝, 스파크 발생 불똥이 튀며 스크래치 발생


http://cuk.or.kr/sub01_open/view.asp?key=1&local=s&part=open&num=108912



기타 도움이 될 만한 글들.:

iPhone 과 연동할 PC 에 맥 설치하는 방법

설치하기전에 먼저 확인해야할 사항 구글링 5종세트 
메인보드별 설치방법
 370만원대의 OSX 를 내PC에 설치하는 방법  
 x86osx : Partition 설정하는 방법
 x86osx : 부팅안될시 추가 조치 방안-Ver 02



:
Posted by Ritz®™

iPC 10.5.6 PPF5 FINAL

System Spec:

CPU : Intel Core2 Duo P8700 (2.53GHz)
메모리 : DDR2 2GB
그래픽 : nVidia GeForce 9600M GT
15인치와이드, 320GB, DVD-Multi, 6셀배터리, HDMI, 802.11n,



사용자화 선택사항


- ICH-Fix
- Wireless 카드(Broadcom) 드라이버

추가 적용해야할 사항 - Retail로 전환후 10.5.8 Combo Update로 마무리

- Chameleon 2.0-RC4
- com.apple.Boot.plist
- DSDT.aml
- Trackpad.prefPane.zip
- Driver Pacakag
- 그래픽카드(9600m GT)설정 << ❶ Chameleon 2.0-RC3 이용하여 설정, ❷ nvidia.rom 이용하여 설정, ❸ dsdt.aml로 설정, ❹ GFX-String으로 설정
- 사운드카드(IDT 92HD71B7 HDA AUDIO) 드라이버
- uuid의 실질적인 적용으로 리얼맥화시켜 iTunes 완벽대처

RealMac UUID:

Hardware UUID: 00000000-0000-1000-8000-000A95C2E73F
00:0a:95:c2:e7:3f (en0)

Hardware UUID: 00000000-0000-1000-8000-001451634A83
00:14:51:63:4a:83 (en0)

Hardware UUID: 00000000-0000-1000-8000-00145166A1E7
00:14:51:66:a1:e7 (en0)

iMac7,1: 00000000-0000-1000-8000-001B639AD7D4






기타 도움이 될 만한 글들.:

설치하기전에 먼저 확인해야할 사항 구글링 5종세트 
메인보드별 설치방법
 370만원대의 OSX 를 내PC에 설치하는 방법  
 x86osx : Partition 설정하는 방법
 x86osx : 부팅안될시 추가 조치 방안-Ver 02



'Hackintosh > NoteBook' 카테고리의 다른 글

SAMSUNG SENS NT R510에 해킨토시 설치하기  (0) 2010.02.05
후지쯔 P7010  (0) 2010.01.31
Samsung Q210-FS02  (0) 2009.12.15
Sony Vaio CR11z, CR21z, CR31z with ATI X2300 and Snow Leopard  (0) 2009.12.07
DELL M1210 OS X SETUP  (0) 2009.12.06
:
Posted by Ritz®™