DivX Pro 7

DivX Pro 7

상업용 Linkinus 만큼이나 인기가 높은 irc 채팅 프로그램 Colloquy.

채널의 한글 설정은 아래 그림과 같이 설정하여 주면 된다.

Install a Radeon HD 4890 PC in a Mac Pro Without Flashing It!

롬 플레싱 없이 Mac Pro에 HD 4890 PC카드를 Mac Pro에 설치하는 방법!!

source : http://www.planetamac.es/como-instalar-una-radeon-hd-4890-en-un-mac-pro-sin-flashear

We were dreaming about it, and Netkas did. Originating from the Hackintosh projects, those "extensions" can be installed on most PC version of Radeon without requiring to flash the BIOS of those cards. How does it work? In summary, those extensions include part of the EFI code required for the card to be recognized by the Mac and to have them active in Mac OS X. Hereafter are results obtained after installing a Radeon HD 4890 PC version in a Mac Pro 2008:

Hereafter is the procedure to get to this point:

• Install Radeon HD 48x0 drivers shipping with Mac Pro 2009: http://www.sendspace.com/file/gvsi12
• Install extensions allowing recognition of those PC version cards: http://rapidshare.de/files/46982841/ATI_Init.pkg.html
• Install patched extension to activate 3D acceleration (only for cards not recognized by the system as HD 4890): http://rapidshare.de/files/46893369/accel.tar.bz2.html You can also for those cards use the application kexthelper.

This procedure works with most Radeon: HD 4870, 4870X2 (recognized as 2 HD 4870), HD 3870, HD 4890, ... On our card, the first DVI works perfectly as a DVI Dual Link port, while the second one is only a single link. Beside this detail, everything is just working fine. Unlike with the Mac Edition card, such extension-activated card is becoming only active during the loading of Mac OS X and all components, and not immediately after the boot. This could be a problem is you want to boot from another partition or as a single users, however, it is so much easier than flashing the original BIOS of the card, that it should be considered by most users.

Install a Radeon HD 4890 PC in a Mac Pro Without Flashing It!

롬 플레싱 없이 Mac Pro에 HD 4890 PC카드를 Mac Pro에 설치하는 방법!!

source : http://www.planetamac.es/como-instalar-una-radeon-hd-4890-en-un-mac-pro-sin-flashear

We were dreaming about it, and Netkas did. Originating from the Hackintosh projects, those "extensions" can be installed on most PC version of Radeon without requiring to flash the BIOS of those cards. How does it work? In summary, those extensions include part of the EFI code required for the card to be recognized by the Mac and to have them active in Mac OS X. Hereafter are results obtained after installing a Radeon HD 4890 PC version in a Mac Pro 2008:

Hereafter is the procedure to get to this point:

• Install Radeon HD 48x0 drivers shipping with Mac Pro 2009: http://www.sendspace.com/file/gvsi12
• Install extensions allowing recognition of those PC version cards: http://rapidshare.de/files/46982841/ATI_Init.pkg.html
• Install patched extension to activate 3D acceleration (only for cards not recognized by the system as HD 4890): http://rapidshare.de/files/46893369/accel.tar.bz2.html You can also for those cards use the application kexthelper.

This procedure works with most Radeon: HD 4870, 4870X2 (recognized as 2 HD 4870), HD 3870, HD 4890, ... On our card, the first DVI works perfectly as a DVI Dual Link port, while the second one is only a single link. Beside this detail, everything is just working fine. Unlike with the Mac Edition card, such extension-activated card is becoming only active during the loading of Mac OS X and all components, and not immediately after the boot. This could be a problem is you want to boot from another partition or as a single users, however, it is so much easier than flashing the original BIOS of the card, that it should be considered by most users.

시스템 자원이나 쓸데 없이 차지하고 있고 부하(Load)를 주고 있군요.