1. 부팅시에 f8을 누르거나 Chameleon 같은 경우 스페이스 바를 눌러 부팅옵션을

"-v -f" 로 주어 부팅하여 다음 그림과 같이 실행합니다.

It can be upgraded from 10.5.7 to 10A432.

Try to install Existing Leopard Hard Disk. It just upgrade from 10.5.7 to 10.6.0

Then update 10.6.1 by software Update.

But, you have to replace Sleepenabler.kext from Netkas' site when you update to 10.6.2.

It sometimes did not working GFX-String in 10.6.2, especially nVidia 7xxx series, 8xxx series.

if you have black screen after booting followed by lord_webi's guide.

delete following prefs/plists if existing in directory (boot with -x):

/Library/Preferences/ByHost/com.apple.preference.display*
/System/Library/Preferences/ByHost/com.apple.preference.display*
/Users/YOURUSER/Library/Prefereneces/ByHost/com.apple.preference.display*

same to *loginWindow* prefs/plists ... in all that directories if existing ...

restart and your EFI string will work again ...

세계 최초의 Chameleon + Retail DVD(Vanilla 커널) 방식의 시스템,

물론, 이전에 Digital Dreamer가 해킨 이미지를 이용, VooDoo 커널을 이용하여 설치성공하였습니다만, 어디까지나 해킨 이미지였습니다.

개발자 버전을 이용하여서 정식 성능은 아닙니다만 기존 맥프로 옥타코어보다 성능이 뛰어납니다.

뭐 해킨이 안정성 떨어지고 어쩌구 저쩌구 말들이 많은데 설치하기 나름입니다.

설치 방식들은 다음 글에 기술하였으니 참고하시기 바랍니다.

어떤 방식을 이용하느냐는 자신에게 달려 있습니다.

x86osx.textcube…402

http://x86osx.textcube.com/234

왜 세계최초였었는냐 하면 10.5.7 개발자 버전을 세계 최초로 확보하였기 때문에 세계 최초가 되었습니다. ㅎ ㅎ

Try to click the Icon rounded by yellow & Orange circle.

Pic1.

Pic2.

6 TOP MAC Apps for Free!!

Install : Snow Leopard Retail and Rebel EFI CD

945GC	Atom	D945GSEJT
		D945GCLF2D
		D945GCLF2
		D945GCLF

Mac OS X 10.6.2 build 10C540 Seed Note

Mac OS X Update 10.6.2 is an update to Mac OS X 10.6.

Installation Instructions

The Mac OS X 10.6.2 Update (Combo) updates

- Mac OS X 10.6 and 10.6.1

- Any earlier seed of Mac OS X v10.6.2 ONLY AFTER installing the included reversioner. If you installed a previous seed of Mac OS X v10.6.2, please install the enclosed Reversioner.pkg, do not restart but install the update immediately.

The Mac OS X 10.6.2 Update (delta) updates

- Mac OS X 10.6.1

- Any earlier seed of Mac OS X v10.6.2 ONLY AFTER installing the included reversioner. If you installed a previous seed of Mac OS X v10.6.2, please install the enclosed Reversioner.pkg, do not restart but install the update immediately.

Please be aware that you will not be able to revert back to your previous system after updating. Please install this update on a system you are prepared to erase if necessary.

As this is a pre-release build, it is not advisable to use this software on a production system with information on it that you depend on for your business.

Known Issues

- None

Focus Areas (Changes in 10C540):

AFP

- Resolves an AFP panic.

AirPort

- Resolves a performance issue on new iMacs.

GraphicsDrivers

- Fixes a system hang issue on some video cards.

- Resolves a kernel panic on some video cards.

- Resolves an issue with plugging and unplugging to an Apple TV.

Kernel

- Resolves a VMWare issue.

USB

- Resolves a panic with USB.

Updated Components in Mac OS X 10.6.2

- AddressBook

- AFP

- apache

- AppleBacklight

- AppleDisplays

- AppleScript

- AppleWWANSupport

- ApplicationFirewall

- AppKit

- Apache Portable Runtime

- ASR

- ATS

- ATSUI

- Battery Menu Extra

- BezelServices

- Bluetooth

- CarbonCore

- CFNetwork

- CFPropertyList

- CFRunLoop

- CFURL

- ColorSync

- Component Manager

- configd

- Core Chinese Engine

- Core Media

- Core Animation

- Core Applications

- CoreAudio

- CoreData Framework

- CoreData Predicates

- CoreFoundation

- CoreGraphics

- CoreImage

- CoreMedia

- CorePDF

- CoreServicesUIAgent

- CoreText

- CoreTypes

- CoreUI

- CoreVideo

- CrashCatcher

- Date Time Prefs

- Dictionary Application

- Dock

- ExchangeWebServices

- Expose

- Family Controls

- Fax

- FileSync

- FileURL

- Finder

- Fonts

- Foundation

- Front Row

- Garbage Collection

- GraphicsDrivers

- GPU Compute

- Help Viewer

- HFS

- High Level Toolbox

- iCal

- iCal Exchange

- iChat Audio/Video/BuddyList/Jabber/Menu/Pref

- ICU

- iDisk Syncing

- Image Capture

- ImageIO

- ImageKit

- Inkwell

- InstallCmds

- IOAHCIBlockStorage

- IOAHCIFamily

- IOHIDFamily

- IOPlatformPluginFamily

- IONetworkingFamily

- IOKit Kernel

- iPhoto

- IPSec

- Japanese Analysis

- Kerberos

- Kernel

- KeyboardPref

- KeychainAccess

- Kotoeri Dictionary Trainer

- Language Analysis

- Latent Semantic Mapping

- LaunchServices

- libdispatch

- LibInfo

- libpcap

- libsecurity

- libxml2

- LoginWindowUI

- Mail

- mDNSResponder

- Migration

- MobileMe

- Mosaic Screen Saver

- network_cmds

- Networking

- Network Pref Pane

- NTFS

- Objective C

- OpenCL

- OpenGL

- OSInstaller

- PackageKit

- Parental Controls

- Persistence

- Phone Conduit Sync

- Photo Booth

- Preview

- Printing

- Quartz Composer

- QuartzCore

- QuickLook Office

- QuickTime

- QuickDraw Manager

- QuickTime Player

- Screen Saver

- Screen Sharing

- securityd

- security_certificates

- SecurityAgent

- Software Update

- Spaces

- Speech Recognition

- Spell Checker

- Spotlight

- Sync Services

- System Prefs

- System Configuration

- System UI Server

- Text Checking

- Time Machine

- Time Zone Data

- Traditional Chinese Input Method

- Translation Widget

- Universal Access Pref Pane

- URLMount

- USB

- Voice Over

- VPN

- Weather Widget

- WebDAVFS

- xQuery

- xType

EDIT 11-21-2011:
WoodyHDA.kext for ALC882:
You have to backup AppleHDA.kext and replace it with WoodyHDA
http://uploaded.to/file/jvthtx5v/from/8kp9rf
 
First of all, thanks Peter314,

I just translated Peter314’s posting.

EDIT 12-10-2009:
Peter New DSDT v2.1 and LegacyHDA for ALC882:

3001___v2.1.zip ( 82.3K )

ALC882v10.kext.zip ( 8.77K )

EDIT 11-11-2009:
Peter update DSDT for P5W, for 2 and 4 CPU, based on 3001

EDIT 10-11-2009:

Bios Setting.
As my experience,

if Jmicron SATA/PATA controller is Enabled. No.1 Black Port, rounded Green Color, Above of Pic1.

SATA mode should be Basic(IDE) until 10.6.1.

After update to 10.6.2, it doesn’t matter Basic or AHCI.

But, Graphic Card is something missing as configured by OSX86 Tools.

I’ll correct Graphic Card Information.

No.2 is General SATA Port, No.3 is Backup Port.

EDIT 02-11-2009:
Added section to modify the LPC.
Removed section of the VGA due to not the best action.
Fixed all warnings when compiling, now DSDT Annex compiles the result of:
Compilation complete. 0 Errors, 0 Warnings, 0 Remarks, 46 Optimizations

EDIT 22-09-2009:
I added the source and the DSDT compiled versions with added support for the ATI 4870 and without any VGA.
DSDT BIOS code is based on 2504.

Yesterday after the exhausting struggle with the DSDT of my album, and finally killed and surrendered … I managed to finally stabilize the operation of all components and I have a stable operating the USB and FireWire problems that they have done since version 10.5.6.
We managed to overcome in order to always operate all ports, they always operate under the High Speed USB 2.0, FireWire always work, no strange errors in the console of the FireWire and the EHCI / UHCI is loaded AppleHPET, AppleRTC, working properly Sleep, Restart, Shutdown, I refer impression of the system is not rising faster still, no kext in / S / L / E has not been removed, modified, or added … and for dessert, a cake of raisins to the acting got a wake-up from sleep mode when you click the mouse or keyboard … one sentence full of grazing …

And what needs to be done.
1. Upload BIOS version 2504 - later do not contain tables SSDT - note the bios does not support 45nm processors.
2. Pull the DSDT and make the following modifications:


1. HPET, RTC fix and stabilization of the USB and FW:

Original section HPET:

Code:

Device (HPET) ( Name (_HID, EisaId ( “PNP0103”)) Name (CRS, ResourceTemplate () ( Memory32Fixed (ReadOnly, 0xFED00000, / / Address Base 0x00000400, / / Address Length _Y09) )) OperationRegion (HPTC, SystemMemory, HTBA, 0x04) Field (HPTC, ByteAcc, NoLock, Preserve) ( HPTS, 2, , 5, HPTE, 1, Offset (0x04) ) Method (_STA, 0, NotSerialized) ( If (LEqual (OSFL (), Zero)) ( If (HPTE) ( Return (0x0F) ) ) Else ( If (HPTE) ( Return (0x0B) ) ) Return (Zero) ) Method (_CRS, 0, NotSerialized) ( CreateDWordField (CRS, \ _SB.PCI0.SBRG.HPET._Y09._BAS, HPT) Multiply (HPTS, 0x1000, Local0) Add (Local0, 0xFED00000, HPT) Return (CRS) ) )

Modified:

Code:

Device (HPET) ( Name (_HID, EisaId ( “PNP0103”)) Name (CRS, ResourceTemplate () ( IRQNoFlags () (0) IRQNoFlags () (8) Memory32Fixed (ReadOnly, 0xFED00000, / / Address Base 0x00000400, / / Address Length _Y09) )) OperationRegion (HPTC, SystemMemory, HTBA, 0x04) Field (HPTC, ByteAcc, NoLock, Preserve) ( HPTS, 2, , 5, HPTE, 1, Offset (0x04) ) Method (_STA, 0, NotSerialized) ( If (LEqual (OSFL (), Zero)) ( If (HPTE) ( Return (0x0F) ) ) Else ( If (HPTE) ( Return (0x0B) ) ) Return (Zero) ) Method (_CRS, 0, NotSerialized) ( CreateDWordField (CRS, \ _SB.PCI0.SBRG.HPET._Y09._BAS, HPT) Multiply (HPTS, 0x1000, Local0) Add (Local0, 0xFED00000, HPT) Return (CRS) ) )

Original section RTC0:

Code:

Device (RTC0) ( Name (_HID, EisaId (PNP0B00 “)) Name (_CRS, ResourceTemplate () ( IO (Decode16, 0x0070, / / Range Minimum 0x0070, / / Range Maximum 0x00, / / Alignment 0x02, / / Length ) IRQNoFlags () (8) )) )

Modified section RTC0:

Code:

Device (RTC0) ( Name (_HID, EisaId (PNP0B00 “)) Name (_CRS, ResourceTemplate () ( IO (Decode16, 0x0070, / / Range Minimum 0x0070, / / Range Maximum 0x00, / / Alignment 0x02, / / Length ) )) )

Original section TMR:

Code:

Device (TMR) ( Name (_HID, EisaId ( “PNP0100”)) Name (_CRS, ResourceTemplate () ( IO (Decode16, 0x0040, / / Range Minimum 0x0040, / / Range Maximum 0x00, / / Alignment 0x04, / / Length ) IRQNoFlags () (0) )) )

Modified section of TMR:

Code:

Device (TMR) ( Name (_HID, EisaId ( “PNP0100”)) Name (_CRS, ResourceTemplate () ( IO (Decode16, 0x0040, / / Range Minimum 0x0040, / / Range Maximum 0x00, / / Alignment 0x04, / / Length ) IO (Decode16, 0x0050, / / Range Minimum 0x0050, / / Range Maximum 0x01, / / Alignment 0x04, / / Length ) )) )

Original section PIC:

Code:

Device (PIC) ( Name (_HID, EisaId ( “PNP0000”)) Name (_CRS, ResourceTemplate () ( IO (Decode16, 0x0020, / / Range Minimum 0x0020, / / Range Maximum 0x00, / / Alignment 0x02, / / Length ) IO (Decode16, 0x00A0, / / Range Minimum 0x00A0, / / Range Maximum 0x00, / / Alignment 0x02, / / Length ) IRQNoFlags () (2) )) )

Modified section of the PIC:

Code:

Device (PIC) ( Name (_HID, EisaId ( “PNP0000”)) Name (_CRS, ResourceTemplate () ( IO (Decode16, 0x0020, / / Range Minimum 0x0020, / / Range Maximum 0x00, / / Alignment 0x02, / / Length ) IO (Decode16, 0x00A0, / / Range Minimum 0x00A0, / / Range Maximum 0x00, / / Alignment 0x02, / / Length ) )) )

2. DTGP method:
It is required that everything that all other fixes using it would work.
It looks like this:

Code:

Method (DTGP, 5, NotSerialized) ( If (LEqual (arg0, Buffer (0x10) ( / * 0000 * / 0xC6, 0xB7, 0xB5, 0xA0, 0x18, 0x13, 0x1C, 0x44, / * 0008 * / 0xb0, 0xC9, 0xFE, 0x69, 0x5E, 0xAF, 0x94, 0x9B ))) ( If (LEqual (Arg1, One)) ( If (LEqual (Arg2, Zero)) ( Store (Buffer (One) ( 0x03 ), Arg4) Return (One) ) If (LEqual (Arg2, One)) ( Return (One) ) ) ) Store (Buffer (One) ( 0x00 ), Arg4) Return (Zero) )

and should be placed after the first opening parenthesis “(“
After placing the section should look something like this:

Code:

* OEM Revision 0x00000000 (0) * Compiler ID “INTL” * Compiler Version 0x20080926 (537397542) * / DefinitionBlock (dsdt.aml “,” DSDT “, 1,” A0543 “,” A0543000 “, 0x00000000) ( Method (DTGP, 5, NotSerialized) ( If (LEqual (arg0, Buffer (0x10) ( / * 0000 * / 0xC6, 0xB7, 0xB5, 0xA0, 0x18, 0x13, 0x1C, 0x44, / * 0008 * / 0xb0, 0xC9, 0xFE, 0x69, 0x5E, 0xAF, 0x94, 0x9B ))) ( If (LEqual (Arg1, One)) ( If (LEqual (Arg2, Zero)) ( Store (Buffer (One) ( 0x03 ), Arg4) Return (One) ) If (LEqual (Arg2, One)) ( Return (One) ) ) ) Store (Buffer (One) ( 0x00 ), Arg4) Return (Zero) ) Scope (_PR) ( Processor (CPU1, 0x01, 0x00000810, 0x06)

3. TM Fix:
This fix enables the Time Machine without having to apply any additional patches, and get rid of the error console: Error UUID: 35

The original section P0P7 (P P Zero 7) - the connector that is connected to Ethernet 1

Code:

Device (P0P7) ( Name (_ADR, 0x001C0003) Method (_PRW, 0, NotSerialized) ( Return (GPRW (0x09, 0x04)) ) Method (_PRT, 0, NotSerialized) ( If (PICM) ( Return (AR07) ) Return (PR07) ) )

Modified section P0P7 (P P Zero 7)

Code:

Device (P0P7) ( Name (_ADR, 0x001C0003) Method (_PRW, 0, NotSerialized) ( Return (GPRW (0x09, 0x04)) ) Method (_PRT, 0, NotSerialized) ( If (PICM) ( Return (AR07) ) Return (PR07) ) Device (LAN) ( Name (_ADR, Zero) Name (_PRW, Package (0x02) ( 0x0B, 0x04 )) Method (_DSM, 4, NotSerialized) ( Store (Package (0x04) ( “built-in” Buffer (One) ( 0x01 ) “device_type” Buffer (0x09) ( “ethernet” ) ), Local0) DTGP (arg0, arg1, arg2, Arg3, RefOf (Local0)) Return (Local0) ) ) )

4. Mobilization of the LPC:
This fix is often needed to start working properly vanillowego energy management. On CD-asus’a LPC is usually hidden under the name SBRG. In addition, after starting the LPC shows an option to “restart automatically after a power failure in the panel on” Energy Efficient machine “

The original top section SBRG:

Code:

Device (SBRG) ( Name (_ADR, 0x001F0000) Method (SPTS, 1, NotSerialized) ( Store (One, PS1S) Store (One, PS1E)

Inserted Modified:

Code:

Device (SBRG) ( Name (_ADR, 0x001F0000) Method (_DSM, 4, NotSerialized) ( Store (Package (0x02) ( “device-id”, Buffer (0x04) ( 0xb9, 0x27, 0x00, 0x00 ) ), Local0) DTGP (arg0, arg1, arg2, Arg3, RefOf (Local0)) Return (Local0) ) Method (SPTS, 1, NotSerialized) ( Store (One, PS1S) Store (One, PS1E)

If someone does not want to, can not, can not register on the forum to download the modified DSDT.dsl the attachment is below the “extra” link to download.

Code:

http://rapidshare.com/files/301490070/DSDT_P5W_DH_Delux_Fix_-_HPET_IRQ_TM_LPC.zip

Unfortunately, some values in the DSDT are generated depending on what is the processor model.

The following values are changing in the Scope (_PR) depending on your CPU:

CODE

OperationRegion (Stbl, SystemMemory, 0x7FF8E0B0, 0x01C6) //different for each CPUx section
 
Name (NCPU, 0x04) // 0x02 for core 2 duo, 0x04 for core 2 quad.

Name (CFGD, 0x7FF80507) //different for each CPUx section

And that, just below the section _PR

CODE

OperationRegion (BIOS, SystemMemory, 0x7FF8E064, 0xFF)

Unfortunately, it follows that for each model, eg processor E6300, E6400, etc. should do yourself a DSDT dump for example, under Ubuntu and improve these values to those learned from the dump.

If these values are incorrect, sleep / shutdown / speedsteep stops working.

In the attachment to the post, fixed version of the DSDT for the Q6600.