달력

1

« 2025/1 »

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
2010. 7. 1. 10:16

MBOUTCD Hackintosh/Install2010. 7. 1. 10:16

준비물:
BootCD: http://dl.dropbox.com/u/1926399/MBCD.ISO
BootCD를 이용하여 부팅한 후, 10.6 retail DVD 를 넣어주고, F5를 누르면 Mac OS X Insatall DVD가 보일 것이다.

그리고 부팅옵션: -v busratio=20 cpus=1
을 입력하면 하단에 입력된 부팅 옵션이 보이고 Enter키를 입력하면 Retail DVD를 로딩하여.
Install.
After the installation boot again from the BootCD, this time start your newly installed system (the same boot arguments). Make /Extra/Extensions folder and copy fakesmc.kext there ( netkas.org ). You have to use RealtekR1000.kext for LAN to work (I found it on kexts.com).
If you have the latest bios version (F4) you can use my dsdt: http://dl.dropbox.com/u/1926399/dsdt.aml otherwise the 10.6.2 kernel will KP with HPET error. Install Chameleon/PCEFI. Update to 10.6.2 (via software update or combo update, both work). That's it, it should work.

Remember that in bios you need to have the sata controller set to "AHCI", not raid.


'Hackintosh > Install' 카테고리의 다른 글

설치하기전에 먼저 확인해야할 사항 구글링 5종세트  (0) 2011.01.04
USB Memory Stick 을 이용하여 해킨토시 설치하기  (0) 2010.07.01
BootCD 종류  (0) 2010.06.07
Disk Image를 마운트하여 Snow/Leopard 설치하는 방법  (0) 2010.05.18
16GB USB Memory Stick Configuration  (0) 2010.03.13
:
Posted by Ritz®™
2010. 7. 1. 08:40

fermi/gtx 480/gtx 470 드라이버 설정하기 - 해킨토 Hackintosh/Graphic Card2010. 7. 1. 08:40

update 2010/06/18: it's finally working smile.gif

how to make it work:
1. install 10.6.4
2. install a fermi capable bootloader (for install procedure please look elsewhere), aserebln or chameleon:

aserebln (supports GTX 480/470/465/480M + preliminary memory fix):
Attached File  aserebln_fermi.zip ( 85.78K ) Number of downloads: 138

diff (not needed for installation): Attached File  aserebln_fermi_diff.txt ( 1.21K ) Number of downloads: 115

chameleon (thx BiTRiP, supports GTX 480/470):
http://www.insanelymac.com/forum/index.php...st&id=73128

3. add this to your boot plist if you haven't done so already:
CODE
        <key>GraphicsEnabler</key>
        <string>Yes</string>

4. install the new nvidia driver: you'll probably have to manually extract the kexts with pacifist and copy them to /System/Library/Extensions.
don't download the driver from nvidia, they rereleased the drivers, but without the necessary NVDAGF100Hal.kext.

also, megauplad download is working again, so use either of these downloads:

http://www.megaupload.com/?d=BHSAX759

Attached File  RetailMac19.5.8f03.001.zip ( 7.63MB ) Number of downloads: 68

Attached File  RetailMac19.5.8f03.002.zip ( 7.63MB ) Number of downloads: 53

Attached File  RetailMac19.5.8f03.003.zip ( 7.63MB ) Number of downloads: 45

Attached File  RetailMac19.5.8f03.004.zip ( 1.38MB ) Number of downloads: 47

since i can't attach .001, .002, ... files and only files < 10 meg, you'll have to rename these files to .zip.00* (e.g. RetailMac19.5.8f03.001.zip to RetailMac19.5.8f03.zip.001) and use an unarchiver (or the unarchiver) that can unpack split archives.

5. edit NVDAResman.kext Info.plist to include "0x06c010de&amp;0xfff0ffff"
6. clear caches and/or ignore cache on bootup (you know the procedure)
7. if it's working for you, please post it smile.gif

Attached File  Screen_shot_2010_06_21_at_4.57.03_PM.png ( 25.75K ) Number of downloads: 160

Attached File  Screen_shot_2010_06_18_at_4.46.25_PM.png ( 203.82K ) Number of downloads: 447

Attached File  Screen_shot_2010_06_18_at_4.47.02_PM.png ( 132.45K ) Number of downloads: 231

apparently system profiler doesn't recognize the vram size, but the opengl driver does.

edit: one sad thing: opencl doesn't work yet :/


--------------------------------------------------------------------------------------------------------
old post:
so, are there already any osx86 users that can call themselves lucky owners of a fermi card?

it seems like 10.6.3 brings support for fermi cards:
doing a "find /System/Library/Extensions/ | xargs strings -arch x86_64 2>&1 | grep -i "fermi"" gives 48 hits, including things like nvFermiGLContext and nvFermiHAL in GeForce.kext.

and it also seems like the geforce opencl driver has support for sm_20 (fermi ptx code).


so the question is if this enables full fermi support and is anyone able to test it yet?

'Hackintosh > Graphic Card' 카테고리의 다른 글

CS4에 적용된 CUDA기술이 실제로 사용되어지는 가요?  (0) 2010.08.31
Radeonhd 5000 series is going to work  (2) 2010.07.03
ATI Graphic Card Driver  (0) 2010.04.10
듀얼모니터 &그래픽 카드가 안 잡힐 경우  (0) 2010.03.26
Gigabyte Geforce GTX260 V2 UDV Super-Over Edition 896M  (0) 2010.02.20
:
Posted by Ritz®™
2010. 7. 1. 08:29

NetbookInstaller and NetbookBootMaker Hackintosh/Netbook Installer2010. 7. 1. 08:29

This page documents the current state of NetbookInstaller. Note that this reflects the source code, not necessarily the latest released build.

Key

Fully Supported (may require specific software configurations)
Partially Supported
Unsupported

OS X

10.5 Leopard - Fully Supported
10.6 Snow Leopard - Work in Progress

Hardware (10.5)

Machine Audio Touchpad Bluetooth Card Reader Ethernet WLAN WWAN Sleep Hibernation
Acer Aspire One D150 Works Works Works ??? Works Works Works
Dell Mini 9 / Vostro A90 No Line In Works Works Non Bootable, Slow1 Works Works Works Works
Dell Mini 10v Works Works Works Works Works Works Works Works
Lenovo S10 2 No Inputs Works Works Works Unsupported Works Works
HP Mini 110
Samsung NC-10 Speakers Only

Hardware (10.6)

Machine Audio Touchpad Bluetooth Card Reader Ethernet WLAN WWAN Sleep Hibernation
Acer Aspire One D150 Works Works Works Works Works Works Works
Dell Mini 9 / Vostro A90 Speakers Only Works Works Non Bootable, Slow1 Works Works Works Works
Dell Mini 10v Works Works Works Works Works Works Works Works
Lenovo S10 2 No Inputs Works Works Works Unsupported Works Works
HP Mini 110
Samsung NC-10 Speakers Only Works Works

1 The Mini 9's card reader can not be booted from via the bios, however you can use a helper partition to boot an installed OS from the SD card.

2 The Lenovo S10 reports itself as "Lenovo" and as such it currently cannot be distinguished from other Lenovo devices.

Guides

NetbookInstaller and NetbookBootMaker

Commentary

jimmymac_4 - Jim's Dell Mini 10v Hackintosh Resource

Tips

Advanced Techniques

Just to be clear, I am very well aware that these advanced guides are outdated and need help. Consider them educational.

Older Methods - These old guides are only here for reference and archival reasons. While useful for educational reasons, please do not use these guides for installing. They are outdated and no longer supported.

'Hackintosh > Netbook Installer' 카테고리의 다른 글

NetbookInstaller 2: USB를 이용한 Mac 설치가이드  (0) 2010.10.02
netbook-installer  (0) 2010.07.01
:
Posted by Ritz®™
2010. 7. 1. 08:23

netbook-installer Hackintosh/Netbook Installer2010. 7. 1. 08:23


Update : http://cafe.naver.com/uefi/318


1.


USB에 리테일 이미지를 복원한다.
netbook maker로 USB를 지정하여 부팅가능하게 해준다.
USB자체만으로 부팅하여 설치한다.


2.

준비물 : http://www.mediafire.com/?wrac477m7g5ko

NetbookCD_0.8.3.iso를 Ulrea ISO등을 이용하여 2-4배속으로 구워서 부팅하여 설치한다.
래퍼드/눈범으로 부팅한후 실행하여 해킨드라이버를 설치한다.

NetbookInstaller is a tool used to install Mac OS X on numerous netbooks


10.5 Leopard - Fully Supported
10.6 Snow Leopard - Work in Progress

Hardware (10.5)

MachineAudioTouchpadBluetoothCard ReaderEthernetWLANWWANSleepHibernation
Acer Aspire One D150WorksWorksWorks???WorksWorksWorks
Dell Mini 9 / Vostro A90No Line InWorksWorksNon Bootable, Slow1WorksWorksWorksWorks
Dell Mini 10vWorksWorksWorksWorksWorksWorksWorksWorks
Lenovo S10 2No InputsWorksWorksWorksUnsupportedWorksWorks
HP Mini 110
Samsung NC-10Speakers Only

Hardware (10.6)

MachineAudioTouchpadBluetoothCard ReaderEthernetWLANWWANSleepHibernation
Acer Aspire One D150WorksWorksWorksWorksWorksWorksWorks
Dell Mini 9 / Vostro A90Speakers OnlyWorksWorksNon Bootable, Slow1WorksWorksWorksWorks
Dell Mini 10vWorksWorksWorksWorksWorksWorksWorksWorks
Lenovo S10 2No InputsWorksWorksWorksUnsupportedWorksWorks
HP Mini 110
Samsung NC-10Speakers OnlyWorksWorks

1 The Mini 9's card reader can not be booted from via the bios, however you can use a helper partition to boot an installed OS from the SD card.

2 The Lenovo S10 reports itself as "Lenovo" and as such it currently cannot be distinguished from other Lenovo devices.

'Hackintosh > Netbook Installer' 카테고리의 다른 글

NetbookInstaller 2: USB를 이용한 Mac 설치가이드  (0) 2010.10.02
NetbookInstaller and NetbookBootMaker  (3) 2010.07.01
:
Posted by Ritz®™
2010. 6. 30. 14:13

ASUS P5K Premium WIFI Hackintosh/Mainboard2010. 6. 30. 14:13

























준비물: BootCD, Retail DVD Image

BIOS 세팅

-configure sata as [AHCI]

-CPU configuration :
C1 support [Disabled]
CPU TM Function [Enabled]
Vanderpool technology [Enabled]
Execute Disable Bit [Enabled]
Max CPUID Value limit [Disabled]
Intel Speedstep [Enabled]

-Suspend Mode : [Auto]
-Repost Video on S3 Resume [Disabled]
-ACPI 2.0 Support [Enabled]
-ACPI APIC Support [Enabled]
-Front Panel audio : [HD audio]
-J-Micron Pata/Sata Controler : [Disabled]
-VIA 1394 [Enabled]

설치

BootCD를 넣어 부팅한 다음, Retail DVD 를 넣어준다.

설치가이드

1. Install From Retail Disc
2. Install Bootloader (I tried both EFI9 and EFI10 successfully)
3. Apply DSDT Patch
4. Copy over KEXTs (it worked with just FameSMC, but after crashing I also loaded OpenHaltRestart, PlatformUUID and NullCPUPM)
5. Apply permissions fix

추가하여 윈도우즈 xp가 부팅안될때 다음 그림과 같이 Intel Matrix Storage Driver를 다운로드 받아서 설치하여 준다.


'Hackintosh > Mainboard' 카테고리의 다른 글

MSI Eclipse SLI x58에 해킨토시 설치하기  (0) 2010.07.16
MSI P965 Neo에 해킨토시 설치하기  (0) 2010.07.06
P5Q 해킨토시 설치하기  (0) 2010.06.29
HP Slimline s5128hk  (0) 2010.06.29
Aslock 1333-D667 해킨토시 설치하기  (0) 2010.06.21
:
Posted by Ritz®™
2010. 6. 29. 20:48

P5Q 해킨토시 설치하기 Hackintosh/Mainboard2010. 6. 29. 20:48



Update :  http://cafe.naver.com/uefi/5370

cmos Setup

The hard disk must be set on AHCI mode. This was already my usual mode, no changes here.

This is the whole list of settings I use (what is not included here, makes no difference for OsX, or so I think):

  • Main
    • Storage information
      • Configure SATA as: AHCI
      • HD write protect: Disabled
      • IDE detect time out: 0
    • AHCI configuration
      • CD/DVD time out: 0
  • AI Tweaker (I am using DDR2-1066): set dram timing control as manual: 5-5-5-15-3-52-6-3
  • Advanced
    • Onboard devices conf
      • HD Audio: Enabled
      • Front panel type: HD Audio
      • Marvel IDE: Disabled
      • Marvel LAN1: Enabled (associated LAN BOOT ROM: Disabled)
      • Marvel LAN2: Enabled (associated LAN BOOT ROM: Disabled)
      • LSI Firewire: Enabled
      • Serial port: Disabled
    • USB Configuration
      • USB: Enabled
      • 2.0 Controller: Enabled
      • 2.0 Controller mode: HiSpeed
      • EHCI Hand off: Enabled
      • Legacy support: Auto
    • Plug & Play: Yes
  • Power
    • Suspend mode: auto
    • Report Video: no
    • ACPI 2.0 support: Enabled
    • APIC support: Enabled
    • APM Configuration
      • Power off, everything disabled





'Hackintosh > Mainboard' 카테고리의 다른 글

MSI P965 Neo에 해킨토시 설치하기  (0) 2010.07.06
ASUS P5K Premium WIFI  (0) 2010.06.30
HP Slimline s5128hk  (0) 2010.06.29
Aslock 1333-D667 해킨토시 설치하기  (0) 2010.06.21
Intel DP43TF 해킨토시 설치하기  (0) 2010.06.10
:
Posted by Ritz®™
2010. 6. 29. 00:47

HP Slimline s5128hk Hackintosh/Mainboard2010. 6. 29. 00:47




















HP Slimline s5128hk

  • Pentium E5400 (W)
 2.7 GHz (65W)
 800 MHz front side bus 
 Socket 775
  • 2GB DDR3
 PC3-10600 MB/sec (message as PC3-8500) 
 Type 240 pin
  • Motherboard Name: IPIEL-LA3
 HP/Compaq motherboard name: Eureka3-GL8 
 Manufacturer: Pegatron
  • USB2.0
  • GeForce G210
 512 MB memory
 I/O Ports: single-link DVI, HDMI
  • Harddisk
 750 GB SATA 3G (3.0 Gb/sec) 
 7200 rpm
  • DVD Writer
 Interface: SATA 
 Data buffer memory: 2 MB minimum
  • Audio
 ALC 888S chipset
  • HP USB keyboard(NUM Lock light will not work if you plug it to another USB port)
  • HP USB optical mouse


준비물 : USB디스크에 설치한 Retail Snow Leopard 와 myHack Installer 1.0 RC4.1.

설치시에 Core System Files 즉, X11, printers 와 languages 만 선택하여 Post-install 과정을 수행하는 것이 중요합니다.

  • "7-8 minutes 정도" 남겨둔 상황에서 설치과정이 중단되고 재부팅하라는 메시지가 보일 것입니다.  당황하지 마시고 재부팅하여 부트로더가 있는 USB로 부팅하여 주시고 부팅후에 bootloader 를 OSX 가 설치된 하드디스크에 설치하여 주세요.

* Download 10.6.1 update, install on your Machine and restart.

  • Video - install all the nvidia kexts(kest, bundle & plugin) found in /System/Library/ . After Restart you will notice that the display gets better and use OSX86tools to change the resolution(you can check the supported resolutions in Bootloader).
  • Sound - VoodooHDA(HDMI Audio is not working so use OnBoard Audio)
  • Ethernet - not yet tested
  • Media Card Slot - not yet tested

Notes(유의사항):

  • OS 부팅시 hang 걸리니 "GraphicsEnabler"를 사용하지 마세요.. kext를 설치한 후에 잊지마시고 GraphicsEnabler 는  com.apple.boot.plist 파일에서 'N' 으로 설정하세요.
  • It would seem that the 부팅시에 OS 가 응답이 없는 것처럼 보이나 마우스 커서를 움직일 수 있을 것입니다.  몇분간 기다리면 동작할 것이니 인내심을 가지세요.. . .

'Hackintosh > Mainboard' 카테고리의 다른 글

ASUS P5K Premium WIFI  (0) 2010.06.30
P5Q 해킨토시 설치하기  (0) 2010.06.29
Aslock 1333-D667 해킨토시 설치하기  (0) 2010.06.21
Intel DP43TF 해킨토시 설치하기  (0) 2010.06.10
MSI P35 MS-7395  (0) 2010.05.11
:
Posted by Ritz®™
2010. 6. 22. 10:23

삼성노트북 SENS R55/W200에 해킨토시 설치하기 Hackintosh/NoteBook2010. 6. 22. 10:23








































1. System Spec
삼성노트북 SENS R55/W200
CPU : Intel Core2 T7200
그래픽 : nVIDIA GeForce Go7400 256M
사운드 : Analog Devices AD1986A @ Intel 82801 GBM ICH7-M...
유선랜:  broadcom 440x 10/100
무선랜: Intel(R) Pro/Wireless 3945ABG Network Connection
FireWire : Ricoh RL5C552 IEEE 1394

2. 설치 이미지 : iPC 10.5.6 해킨배포본

3. 사용자화

Language Translations -> Korean
Video Drivers -> NVdarwin 256MB
Chipset Drivers -> Intel ICHx SATA Drivers
Audio Drivers -> AD1986
Ethernet Drivers -> AppleBCM440XEthernet
Fixes and Patches -> PS/2 Device Support
DSDT Patches -> Patch DSDT

4. 설치과정 참고 : Installation Guide

'Hackintosh > NoteBook' 카테고리의 다른 글

Gateway NV5909H Laptop  (0) 2010.07.07
R590-URA1K 에 해킨토시 설치하기  (0) 2010.07.03
MSI 1651 laptop  (1) 2010.05.14
Dell Stdio XPS 1640 해킨토시 설치하  (0) 2010.05.06
HP Pavilion dv7  (0) 2010.05.05
:
Posted by Ritz®™

티스토리툴바